Written by Scott Lear
From the Sept. 2006 issue
Posted in Buyer's Guides
We owe a lot to the car companies that were brave—or desperate—enough to bring something truly new to the mass market. With trillions of dollars in earnings on the line, one can’t really blame them for playing it safe most of the time. Rather than springing some wonderful, unusual creation on the unsuspecting public, most manufacturers minimize risk by taking baby steps that gently evolve their already successful products.
Still, every few years someone really throws the dice. Designers take the majority of these gambles, producing results like the polarizing BMW M coupe or the abominable Pontiac Aztek. Basic layout is harder to fiddle with, but ask anyone who’s ever had the fortune of piloting a McLaren F1 and they’ll tell you that the unusual central seating position is tops.
And once in a long while, a totally different kind of powerplant is allowed to move from the rotating platforms of the big auto shows to the showrooms.
Will It Go Round in Circles?
In May 1967, Toyo Kogyo introduced the Mazda 110S, a car known as the Cosmo Sport in Japan and, eventually, everywhere else. The car featured “Buck Rogers” styling and an interesting powerplant under the hood: the rotary engine, something that had been brought to the public only a few years earlier by NSU.
The official brochure made a pretty bold claim: “Judged on the basis of engine size, weight and cost—the 110S accelerates faster and goes faster than any other car in the world.”
It would be easy to dismiss this statement as pure marketing baloney, but the Cosmo Sport had the stats to back up the claim. It made approximately 110 horsepower and 96 lb.-ft. of torque, which was enough to produce a zero-to-60 time of less than nine seconds and a top speed exceeding 110 mph—all from less than 1 liter of engine displacement. Sort of.
The thing is, calculating the displacement of a standard four-cycle piston engine is easy, but the math was trickier on the Cosmo Sport because its powerplant didn’t have pistons in the conventional sense. The car’s 10A-spec engine had rotors—two of them, shaped like triangles that had eaten too much—spinning happily inside an epitrochoidal shape (visualize an oval with a bit of a pinched waist).
In a standard four-stroke piston engine, the intake, compression, combustion and exhaust cycles must each wait their turn. In a Wankel rotary engine, the four phases are happening at once in different parts of the chamber.
German engineer Felix Wankel invented the engine that bears his name in 1924. A few other manufacturers dabbled with it, most notably Mercedes-Benz and NSU, but it was Mazda who put in the R&D time to come up with carbon-based apex seals (the tips of the rotor that must stay in contact with the epitrochoidal walls), twin ignition plugs and an oil injection system. The result was a rotary that could stand up to everything from high-rpm racing to the daily commute in L.A.
The beauty of the Wankel engine is its simplicity. The only moving parts are the rotors, so there is no complex, energy-robbing valve train to deal with. And unlike regular pistons, the rotors don’t have to constantly change directions, as they just keep spinning along. The movement of the rotors reduces vibration and allows for low-stress, high-rpm operation. Additionally, it’s remarkably compact and light.
Keep on Turnin’
Armed with its revolutionary engine, the Mark I, Series I Cosmo found a small audience, with nearly 350 cars sold at a bit more than $4000. The cars were essentially built by hand at a rate of about one per day.
Halfway through 1968, a Series II debuted with 18 more horsepower, a longer wheelbase and a five-speed transmission replacing the earlier four-cog unit. More than 1100 Series II Cosmo Sports were made before the model run ended in 1972, with only about half a dozen reaching U.S. shores during the production cycle.
While it wasn’t a runaway success like the first Datsun 240Z, the Mazda Cosmo was an important stepping stone for the company and for the Wankel engine design. In 1975, a second-generation Cosmo (our RX-5) debuted, and it was a runaway hit in Japan in the first year alone. Third- and fourth-generations of the Cosmo lasted through the mid-1990s.
Mazda’s Wankel engines evolved as well, and while no other manufacturer has dared to put the rotary under the hood of so many cars, Mazda’s late 1970s debut of the RX-7 finally brought the engine its due fame in U.S. enthusiast circles. Today’s funky four-doorish Mazda RX-8 features the most modern evolution of the Wankel, called Renesis; it generates 232 horsepower and is smaller than the transmission to which it’s mated.
Next time you hear the raspy high-revving blat of a rotary-powered car, take a moment to thank Mazda for having the guts to unleash something as revolutionary as the 110S Cosmo Sport.
Rock Around the Clock
To show that the rotary-powered Cosmo Sport was a sports car of world-class performance, Mazda entered a pair of them in the beyond-grueling 84-hour Marathon de la Route on the Nürburgring Nordschleife. The 10A engines were fitted with a neat butterfly valve system that allowed them to switch from a side intake port at low rpm to a peripheral port at higher revs. The revs were capped at 7000—and thus power at about 130 horses—for durability.
With just three hours to go on the third and final day, one of the cars had to retire with a broken axle. The second car survived the distance and placed a remarkable fourth overall, quite an achievement for a brand-new car featuring a completely new type of engine.
Mazda continued racing their rotaries, and the big payoff came in 1991 when a 700-horsepower, normally aspirated, quad-rotor Mazda 787B captured the overall win at the 24 Hours of Le Mans. Today, rotary-powered Mazdas can be found at nearly all kinds of sports car events, from local autocrosses and club races to American Le Mans Series professional endurance contests.
Publisher Tim Suddard took a spin in Leno’s Cosmo for some quick driving impressions. “The car is smaller than you would think,” he remarked. “The overall size is way more like a first-gen RX-7 than a second-generation car. The styling is just plain cool, like a mini Japanese T-bird. No real ugly lines, but pure funky outside, while the inside is nearly as straightforward as an MG.”
Despite the fact that the car is nearly 40 years old, he observed that the chassis felt thoroughly modern, with no vices at moderate speed. “The ride quality is real decent, no squeaks or rattles or much wind noise,” Suddard said. “The brakes feel spongy—they might just need work, but they’re barely adequate. It’s about as fast as a Triumph TR6, tighter, but the brakes are not as good.”
Breaking News: Leno Likes Cars:
This particular 1970 Series II Mazda Cosmo belongs to all-purpose car fanatic and “The Tonight Show” host Jay Leno. While each of the cars in his garage are special, the Cosmo Sport has several attributes in that it’s rare, it’s attractive and it came off the assembly line with an unusual powerplant.
“I’ve always liked them, and it was the first rotary car. I want one of every type of engine,” Leno told us. The original owner was a Lockheed U-2 spy plane pilot. He sold the car in the 1980s, and it sat in a garage in California for 16 years until Leno caught wind of it and snapped it up. Leno and his crew have spiced things up a bit, swapping in a larger displacement 12A-spec engine fed by a big Weber carb. The upgrades have given the car a healthy dose of horsepower and it gleams under a poster created from the original brochure.
Great Car! I'm not surprised who owns it. If there are others out there with Cosmos, RX-2s, RX-3s or series 1 RX-7s, please share your pictures with us!
You'll need to log in to post.
4 days ago in Articles
When Lotus first unleashed the Elise some 20 years ago, the automaker’s message was clear: We’re back, baby.
6 days ago in News
Gearhead heaven? We think it looks something like this.
1 week ago in News
Gates open this Friday for the Classic Motorsports Mitty at Road Atlanta.