1 2
patgizz
patgizz PowerDork
4/20/15 5:14 p.m.

parting out:

1990 chevy C3500 extended cab dually. complete truck less engine and steering column available. very good 9 foot flatbed will bolt to any cab + chassis truck, or the way it is will bolt to any 88-98 chevy pickup as i made a front crossmember to bolt to the stock front bed mounts.

1968 chevy c20 pickup. no engine available. cab floors and rockers weak. was going to restore but it was caught in the flood that killed both my parents' trucks. all the trans gear oil is in the seat. has good glass, sliding rear window, nice straight grill, decent hood and fenders. front tires go flat in a couple days. it was my around town driver before the flood. the 292 got water in the oil pan so we drained it and are pulling the motor to put in my dad's car. will sell the roller with clear title for $600, perfect if you need a parts truck and don't have a title or want to throw a small block in it and have a beater that turns heads.

2005 buick rendezvous front wheel drive. totalled in february, radiator pushed back to engine. transmission, front struts/springs/bearings, rack, rear rotors/pads/calipers all have less than 3k. engine harness pinched so electrics are weird. may have cracked oil pan as engine oil is empty. tires are equally new goodyears, they were put on the week of thanksgiving. buyout was $915 so if someone wants whole vehicle for that, it's a steal if you have one and need a trans and suspension parts or tires. will part it out as well.

i have a hoard of parts. most is gm, starting with 1939-46 pickup bits, 53-54 chevy stuff, and then misc stuff going up from there. tons upon tons of 88-98 pickup parts, 91-96 b body parts. race parts. i'm getting ready to spring clean my stash to ebay, but anything i feel you guys could use will be listed here first. if you need something i might have, ask. need to clean stuff out to make room for the new project, as well as pay for some of the stuff i bought last night.

everything located in valley city ohio or medina ohio

PseudoSport
PseudoSport Dork
4/20/15 5:33 p.m.

Any pictures of the 68 C-20?

Dusterbd13
Dusterbd13 SuperDork
4/20/15 6:31 p.m.

I need a pass side spindle and drum brake hub for 64-72 a body...

patgizz
patgizz PowerDork
4/20/15 7:32 p.m.
PseudoSport wrote: Any pictures of the 68 C-20?

love the truck, don't have it in me to restore it as i don't feel comfortable in the cab. if it were 2" longer front to back i would keep it.

has white rims to match back on front, i was test fitting my late model steelies in these pics. have a new but older pair of matching 225/75/16 load range e tires to the fronts that are on it that go with.

no A body spindles, i just had to buy a set myself. surprisingly few A body parts since i've had a few and have 2 currently. i will keep an eye out for you though, as i've got a few buddies with them that may have swapped over to discs and have the drum parts sitting somewhere in a corner.

patgizz
patgizz PowerDork
4/20/15 7:42 p.m.

also have competition engineering ladder bar rear frame. welded together at 36" wide, with a coil over crossmember, rear crossmember, and comes with still wrapped up front drop crossmember. $400 worth of parts, already together ready to put in the back of something. pics if anyone wants. $200

16x8 8 lug american racing outlaw II wheels, one pair, like new. $100

stock rear control arms from 95 impala SS with sway bar mounts on lowers. fit any 77-96 b body, off a southern car so not rusty. $40

radiator new in box for a mid 90's accord i think. if anyone with a honda needs a radiator i'll pull it down and look up the part #. $40

OBX stainless small block chevy twin turbo headers $140 NIB

dodge 440 hooker headers, super awesome shape - barely or not used. marked for a late 70's motorhome chassis, so i'd guess these are good for a custom application. $75

new in wrapper core support for 1989-91 suburban or k5 blazer with silverado grille(quad headlights). $75

new 88-98 pickup passenger cab corner $20 or trade for a driver's side one

70-81 camaro left lower quarter panel patch, new $20

VW GTI flares(new aftermarket, fit almost anything with similar wheel arch, was going to use on wrx) $100

2001 5.3 LS truck intake, fuel rails, fuel injectors. 43k miles $50

17" wheels with tires off my 2005 Avalanche. tires have 30% tread left(nitto dura grappler), one has a brand new tube because it got a nail hole slightly too big for a plug. wheels in good shape. $300

93-97 15" S10 2wd aluminum wheels $60

98+ 15" S10 2wd aluminum swirly wheels $60

stock 1991 corvette 17x9.5 sawblades with bald falkens $300

aftermarket(wearever or bendix, forget) C6 Z51 rotors, were on my car for 3 miles then i went back stock because of a caliper issue. i will knock the surface rust off. $75

used LS1 F-body front rotors/calipers/abutments and S10 adapter brackets to get big brakes on a 2wd truck. $150(have to dig the stuff all out).

march SBC long water pump aluminum alternator bracket kit #20120. $50

stock TBI small block aluminum intake $20

TBI adapter from 1990 454. goes from spreadbore(q-jet) intake to TBI. $35

should be big time garage cleanout with pics and more parts/prices this weekend.

chandlerGTi
chandlerGTi UltraDork
4/20/15 8:19 p.m.

Shoot me a pic of the flat bed and vette wheels. Might be able to use that bed on my dodge.

patgizz
patgizz PowerDork
4/20/15 8:37 p.m.

will pic bed tomorrow, wheels buried in my dad's barn but i'll dig them out and have them here friday so you can peek at them.

5th wheel hitch on insanely beefy plate, should bolt to any commercial/cab&chassis frame. works, has some wear on the face. will list brand and part # later but i looked it up and it is $1800 new. $150.

14 bolt 10.5" full floater rear axle from 1996 k2500 suburban. 3.73 with G80 locker, functioning axle drum to drum. $200

16" wheels from same suburban. steelies with caps and rings, and firestone transforce HT load range E tires with nice tread, no cracking. same wheels as pic of the 68 pickup above. $200 for all 4.

heavy 8 lug 16x6 wheels - have round holes around hub. these were on my heavy duty cargo trailer, should work on any 8x6.5 pickup. need painted, the powdercoat peeled. $50

patgizz
patgizz PowerDork
4/20/15 8:39 p.m.

album with a ton of pics of the 68 c20

http://s1134.photobucket.com/user/patguzowski/library/c20?sort=3&page=1

on the parts i'm throwing prices out there. feel free to message me with an offer. on the vehicles i'm pretty firm.

TIGMOTORSPORTS
TIGMOTORSPORTS Reader
4/23/15 7:26 p.m.

Pic of the twin turbo sbc headers?

patgizz
patgizz PowerDork
4/23/15 9:28 p.m.

these are they, except mine are in a box wrapped in plastic, and if you would like a picture of mine i can do that too.

http://www.ebay.com/itm/Chevy-Camaro-Trans-Am-Firebird-350-305-TWIN-TURBO-HEADERS-TT-SBC-GM-MANIFOLDS-T3-/271070499710?hash=item3f1d0f937e&vxp=mtr

Ranger50
Ranger50 PowerDork
4/23/15 10:09 p.m.
patgizz wrote: these are they, except mine are in a box wrapped in plastic, and if you would like a picture of mine i can do that too. http://www.ebay.com/itm/Chevy-Camaro-Trans-Am-Firebird-350-305-TWIN-TURBO-HEADERS-TT-SBC-GM-MANIFOLDS-T3-/271070499710?hash=item3f1d0f937e&vxp=mtr

Damn. And I don't have anything to use them on... Lol

Cooter
Cooter Reader
4/23/15 10:52 p.m.

Photo of the 440 headers?

patgizz
patgizz PowerDork
4/24/15 6:40 p.m.
Cooter wrote: Photo of the 440 headers?

patgizz
patgizz PowerDork
4/24/15 6:42 p.m.

2005 avalanche wheels, have centers.

s197 bullitt wheels, oem fords not chinese knockoffs. i bought them new in 2005. have weak continentals on them, can dismount. $300

if you buy any wheels from me i'll mount/balance tires you bring for $40 a set

stay tuned, about to drop a bigger updated list over the weekend.

patgizz
patgizz PowerDork
4/25/15 2:53 p.m.

LS parts:

4th gen exhaust manifolds(need studs extracted). $50

4th gen MAC offroad Y pipe, like new, was installed then removed for headers $125. package deal with manifolds $150

pickup truck exhaust manifolds with good studs $50

pickup intake, rails, injectors off a 43k mile 2001 5.3 $50

more other stuff:

1967-68 camaro rear bumper. nice and straight, needs chromed, painted, or whatever. $40

73-80 suburban rear bumper, good straight shape with driver quality chrome $40

meyer plow undercarriage and hoop for 73-87 chevy truck $100

73-87 chevy truck longtube headers, like new were only on to break in a new engine. just long enough to about burn the paint off. hedman brand. $40

Dusterbd13
Dusterbd13 SuperDork
4/25/15 3:13 p.m.

Wouldn't happen to have a cheap 454 tbi unit, would you?

That and the turbo headers and my elky. ..

patgizz
patgizz PowerDork
4/25/15 5:11 p.m.
Dusterbd13 wrote: Wouldn't happen to have a cheap 454 tbi unit, would you? That and the turbo headers and my elky. ..

have one off a low mile 1995 engine, that ran perfect. the only reason i changed it out was different IAC plug when i put the engine in my 90 C1500. used a 90 throttle body instead of cutting wires. email me your definition of cheap. i know what they go for on ebay, and could list it no problem, but if i could be fair to both of us and get a grm'er what they want, especially in a package deal, i'm more than willing.

markwemple
markwemple HalfDork
4/25/15 6:05 p.m.

Wish you were closer. I need tires for the suburban.

patgizz
patgizz PowerDork
4/27/15 5:30 p.m.

looks like 440 headers are spoken for by cooter and flatbed off the 3500 spoken for by chandlerGTI.

more to come, didn't feel like digging crap out since it was cold this weekend.

there may be a southern 1992 roadmonster sedan with 120k for sale shortly, have to make up my mind on that one.

kevintpoe
kevintpoe New Reader
4/27/15 5:30 p.m.

Is the '68 still available? I am interested. Looking at my work schedue, I will be headed to your part of the world in a couple weeks.

patgizz
patgizz PowerDork
4/27/15 5:36 p.m.

it is, engine still in it but i can get that out pretty quick.

Richard Nixon
Richard Nixon SuperDork
4/27/15 6:00 p.m.
patgizz wrote: there may be a southern 1992 roadmonster sedan with 120k for sale shortly, have to make up my mind on that one.

Go on...

patgizz
patgizz PowerDork
4/27/15 9:02 p.m.
Richard Nixon wrote:
patgizz wrote: there may be a southern 1992 roadmonster sedan with 120k for sale shortly, have to make up my mind on that one.
Go on...

probably right up your alley. white, blue vinyl top, blue leather. new front brake lines, calipers, hoses, rotors, fuel pump, fuel filter. have to pop an ignition module in it as it's performing the "my ignition module is dying" dance once it warms up. those buick rallys would look sweet on it. i would love to keep it, but leaning toward selling it so i can run to summit and buy an LS2 block for the impala.

Richard Nixon
Richard Nixon SuperDork
4/27/15 9:20 p.m.

Any current pics? A/C work? Keep me in mind.

patgizz
patgizz PowerDork
4/27/15 9:31 p.m.

from halloween car show at quaker steak in sheffield

no idea on AC, i started driving it in october and put maybe 800 miles on it.

*black rims wouldn't come with, borrowed off my impala.

1 2
Our Preferred Partners
NAMRbzI3qblvsWHx0FqLR5HCQuju9DjGRW43ZCnKyUOpkgTIDiiwMDnZJAGZ8p6k