1 2
Richard Nixon
Richard Nixon SuperDork
4/27/15 9:44 p.m.

Well, let me know what you decide. Color me interested, especially if the interior is in good shape.

patgizz
patgizz PowerDork
4/28/15 7:09 a.m.

we'll talk after i get the module swapped out.

patgizz
patgizz PowerDork
4/29/15 9:37 p.m.

dug out 4 15x6 chevy truck rallys, 5x5 bolt circle. these technically are van rallys but if you are dying for that 70's look you could put a pair of 8" wide ones on the back(which i also have, and will sell) and 6" wide on the front and get some air shocks. $100 for the set of 6's, $50 for the pair of 8's. i have to check, may have enough 8's to make a set of 4, but have to keep 2 for impala drag tires.

5x5/5x5.5 22" venti v3 bounce rims. ghetto fabulous. 2 good(matching, 0 miles, few years old) tires, 1 horrible, 1 decent. 1 or 2 center caps. get a $500 b-body, donk it out, and go LeMons it on baller rims. $200.

progress is slow digging stuff out, as work is plenty, but i've been collecting boxes to sell and ship stuff by purchasing a bunch of new parts to get boxes.

patgizz
patgizz PowerDork
5/9/15 3:09 p.m.
Richard Nixon wrote: Well, let me know what you decide. Color me interested, especially if the interior is in good shape.

going to drive it for now as i'm down a couple rides while stuff gets fixed.

Richard Nixon
Richard Nixon SuperDork
5/9/15 3:26 p.m.

If you change your mind...

patgizz
patgizz PowerDork
5/14/15 10:17 p.m.

71 monte carlo body shell(one door, no front end) with solid frame and 12pt cage, no floor. rolling on casters. just picked up from another grm'er, then while there made a deal on what is to be my $2015 car, so this one has to go. this is a huge project. it does not have any suspension. it needs to go ASAP, like one week tops. make me an offer. lowball me. got something to trade?

patgizz
patgizz PowerDork
5/17/15 1:32 p.m.

the monte is sold to a CL guy who has ambitions of building a drag car.

used 67-72 chevelle small block headers $10

A body disc brake setup(72 chevelle) complete spindles/rotors/calipers/pads all on a running driving car $200

stock control arms for same fronts $100 rears $35

patgizz
patgizz PowerDork
5/22/15 10:07 a.m.

updated removed some stuff, adding more:

70-81 camaro v8 radiator, good condition $40

73-87 chevy/gmc truck v8 radiator, solid shape didn't leak $40

cheap parts store copper/aluminum fin trans cooler. fins kinda beat up but challenge friendly price $5

np241C transfer case with 31 spline input(fits 4L80, nv4500) from a 1 ton mid 90's chevy truck $125

th400 truck transmission, fixed year yoke. it does work, i was driving the truck, but the fluid smells toasty. it never slipped on me in 2 years of use. $100 with converter

73-87 truck headers for small block, were on my 90 burb for 30 minutes of run time then removed. $40

14 bolt gm truck rear disc brake conversion parts. SRW hubs, 1 pair of rotors on hubs with no miles but surface rust, 1 pair new in box rotors, new caliper brackets with bolts. takes 73-87 4x4 front calipers. $150 will throw in a pair of axle shafts for free from an 87 K20.

88-98 fullsize gm truck 2" drop spindles with rotors and calipers, still attached to stock control arms that have newer ball joints and poly bushings. everything is used. front springs included, i believe they are 2" drop springs but can not promise anything there. $200

10 bolt 3.08 open rear, drum to drum, from an 88 silverado 1500 2wd. 5 lug. $100

markwemple
markwemple HalfDork
5/22/15 10:13 a.m.

This will be an incredibly long shot but, do you have any radio buttons that would work on a 2002 suburban factory radio/cd unit??

patgizz
patgizz PowerDork
5/22/15 12:23 p.m.

got a picture of the unit?

the buttons always wear off.

markwemple
markwemple HalfDork
5/22/15 1:03 p.m.

I could text or e-mail a pic.

patgizz
patgizz PowerDork
5/22/15 6:22 p.m.

Chevylumina at gmail dot com

patgizz
patgizz PowerDork
5/23/15 11:50 a.m.

Will make a package deal on the 3500HD and the 90 3500 after i pull the engine from the 90. An opportunity came up and need liquid cash fast.

Needless to say there's going to be a big updated list this weekend and stuff will be hitting ebay.

markwemple
markwemple Dork
5/23/15 5:48 p.m.

Sent you a pic. I also need the a/v controller for the center console.

patgizz
patgizz PowerDork
5/23/15 7:44 p.m.

got your pic, unfortunately it's completely different from the 00's gm head units i have laying around.

oldopelguy
oldopelguy SuperDork
5/23/15 9:49 p.m.

What is this 3500HD of which you type?

patgizz
patgizz PowerDork
5/24/15 7:19 a.m.

http://grassrootsmotorsports.com/forum/build-projects-and-project-cars/semi-large-tow-rig-build/101849/page1/

literally just started on it last weekend, but an opportunity to buy something that i've been after for literally the last 15 years has popped up

1 2

You'll need to log in to post.

Our Preferred Partners
ZLlMvv0LLPH8LIRe3DMw5Gl6cRESTdCqUuGKtyFaq5gDe7O7w4SmXj9R3n0bHtPM