Tim Suddard
Tim Suddard Publisher
6/9/15 1:56 p.m.
feature_image

With our Tornado Typhoon's body painted and our chassis all assembled, it was time to gently place the body back on the frame.

To make this easier, we made the roll cage bolt to the frame in four places so once lowered, the cage could simply be bolted .

To make this job even easier, we used our lift to lower the body onto the chassis. It was a tight fit, and we had to come in at a bit of an angle, but after a bit of jiggling and cursing, we once again had our Tornado body mated to our frame.

We now had about four weeks to finish the car. That's long way to go since much of the interior needed to be fabricated.

Get all the latest of our classic projects in your mailbox six times a year. Subscribe now.

Read the rest of the story

Our Preferred Partners
7nI72dj34NVfTqMOUr8MyYC8K1i8u7IVVVyDCGamJvfUkXskmJejL8kpFldxmU5J