Tim Suddard
Tim Suddard Publisher
2/3/15 9:30 a.m.
feature_image

The final step in our Tornado's cage was to build a period correct headrest. Any vintage organization will require this headrest, and it is a nice safety feature for vintage rallying as well.

We love cheap and easy, so we took an old trunk hinge from a E28 (1982-1988) BMW 5 Series, cut it to fit the cage and the back of our helmet.

From there, we drilled holes of increasing size, towards the center, not only to make the headrest a bit lighter, but make it look a lot cooler. First we welded a plate to mount a padded and fabric covered board on and then we welded the hinge to the cross bar and voila, we have a cool-looking, cheap-as-chips vintage headrest.

We will then take some scraps left over from the seat material and add padding to the metal plate.

Read the rest of the story

Our Preferred Partners
HuzKeq27bqVWdQLksD9fMOTE1UfDaYpCbCKjaWaKd1rXf3EuFvupMO7olwzNHdUd