1 2
greggotgame
greggotgame New Reader
9/28/13 4:17 p.m.

The rear suspension was quite a bit more involved. I had to fabricate and properly locate both the upper and lower spring purches. I have found over the years that the plumbing section of your local hardware store has everything you need for most small fabrication jobs and it is cheep as long as you are willing to grind off some galvanizeing. In the end it seems to have worked out pretty good. photo 20130708_110826_zps52037909.jpg photo 1374803655436_zps7ecc42a7.jpg photo 1374803644568_zpsf9f54d9b.jpgI did have one small fire. It always suck cleaning dry chemical fire extinguishing agent out of your car fortunately I was able to beat the fire out with my shirt.  photo 1374803602373_zps07799453.jpgThis fire could have been prevented if I had just though about what was on the other side of the what I was welding on. Small mistakes in the shop can coast you a car or house or the use of your arms and legs.

greggotgame
greggotgame New Reader
9/28/13 4:59 p.m.

My first event of the year was a two day rallycross in Cehalis Washington. I had a co-driver for the weekend to help me get the setup right and put as may race miles as possible on the car. The car was a pleasure to drive and fast right from the start. There was only one car is our class that could beat us on out right pace unfortunately my driving let me down. I think some more seat time and a trip to the Primitive Rally School will help the driver and a good alignment with more negative camber in the front will help the car.

Clean photo 
1374868260416_zps3e0a2b76.jpg.

Not Clean  photo 1375038538751_zpsdcf788c0.jpg

Snow tire do not fit as nicely in the back of the car as slicks do.  photo 1374811469301_zps3c2f24a8.jpg

 photo 1375038565397_zpsfc4fe6a8.jpg

Curmudgeon
Curmudgeon MegaDork
9/28/13 6:22 p.m.

Ahhhggg. I'm a fellow rotard, I LOVE 1st gens and this ain't helping.

If I might say something: from years of dirt bike experience I can say SuperTrapps suck balls. By the time you have enough discs to make any decent power the damn thing is so loud you might as well not have any muffler at all. I run a DynoMax on my 13B powered Jensen Healey for that reason.

greggotgame
greggotgame New Reader
10/2/13 8:07 p.m.

In reply to Curmudgeon:Thanks for the tip Curmudgeon I am always looking for a better setup.

greggotgame
greggotgame New Reader
10/2/13 8:23 p.m.

Well last weekend’s rallycross was canceled secondary to the field it was to be held in was transformed into a lake by a storm that dropped 4” of rain over the weekend. I was looking forwards to running in the mud as it would have been the first time I had the car out in wet conditions. Out of the eight or so rallycrosses we have around hear in a year half are wet so it would have been good to get some seat time on a wet course. There is one more event scheduled for the 10th of November but the location is TBA I hope it happens as I am jonsing for some rallycross action.

Mr_Estrotica
Mr_Estrotica Reader
10/2/13 9:06 p.m.

Hopefully the next ORG event is at the English Pit. I'll be sure to introduce myself if I end up going (ie buying a car that is capable of competing).

1 2

You'll need to log in to post.

Our Preferred Partners
bkDoqGIQ2i3KHBLMJM9qu2J29Y6XCY7QQMMVUi4VtJjh2hFqDwi1CAGoi8s0zbkG