This is a sweep function signal generator that is great for creating most any type of electronic signal to test various ECUs and systems.
Lightly used and always well cared for. Still have the original box and manual.
$100 plus shipping from Phoenix area.
Here's the specs:
Output Characteristics
Waveforms Sine, Square, Triangle, Pulse, Ramp
Frequency Range 0.02Hz to 2MHz in 7 ranges
Tuning Range 100:1 on each range
Frequency Accuracy B801: 5% of FS
B803: ± (0.01% +1D)
Frequency Stability 0.1% after 20 minutes
Amplitude 2V to 20V P-P open circuit
DC Offset Variable from < -10V to > +10V open circuit
Output Impedance 50W ±5%
Variable Symmetry 1:1 to 4:1
Output Attenuation 0 to 40dB (20dB ±1dB step and 0 to 20dB variable)
VCF Input 100:1 tuning range with an input voltage level from 0 to -10V
Sine Wave
Distortion < 2% from 10Hz to 100kHz
Amplitude Flatness £ 0.3dB
Square Wave
Rise/Fall Time < 100ns at max amplitude
Triangle Wave
Linearity > 98% to 100kHz
Sweep Characteristics
Sweep Mode Linear
Sweep Time Variable from 20ms to 2s
Sweep Width Variable from 10:1 to 1000:1
Frequency Counter (B803)
Modes Internal and External
Display 4 digit red LEDS
Measuring Range 10Hz to 2MHz.
Accuracy ±0.01% ± 1 count
Sensitivity 50mV RMS
Max Input V 140V P-P
Input Impedance 1MW
General Specifications
Power Requirements AC Line Voltage: 100/120/220/240V ±10%
Frequency: 48Hz to 66Hz
Power Consumption Approx. 5VA
Operating Temperature 0 to 50°C
Size 3.3" H × 8.8" W × 10.1" D
Weight 8 lbs.
Supplied Accessories Manual, Line cord, BNC cable
