Javelin (Forum Supporter)
Javelin (Forum Supporter) MegaDork
10/20/21 12:10 p.m.

Thanks for your tips. I put everything together into a video:

 

dj06482 (Forum Supporter)
dj06482 (Forum Supporter) UltraDork
10/20/21 8:11 p.m.

Thanks, I've never painted calipers before, but I learned a bunch!

BimmerMaven
BimmerMaven New Reader
11/4/22 10:44 a.m.

Other painting tips from my short stint working in a body shop...

Hang these small parts from a hook to paint.

Sprays edges first, flat/bottom second, flat/top last, as applicable.  This makes over spray in the least visible areas.

Degrease.   Then use rubber gloves on both hands to handle part and spray.  Fingers are oily.

Remove masking tape immediately.  Leave a tab when you apply to facilitate removal.  This gives a blended edge at the tape line, instead of a ledge.

You'll need to log in to post.

Our Preferred Partners
to5QSvNg711Eg27CM8VDadCioVDJDlRyIqJIvneUPesoPn0Aj2txMM8nfUcHibQ9