In reply to tb :
I got a big intercooler and pipes in my pile. Like school bus big.
In reply to tb :
I got a big intercooler and pipes in my pile. Like school bus big.
In reply to Stampie :
I'm not surprised anymore, of course you do.
I'm thinking that is both way too big for my setup and probably too big to even fit in my car on the drive home. Application would be a fwd 4 banger hatch right around a ton.
In reply to tb :
You wouldn't be the first to tell me that my stuff is too big for them. I'll bring it anyway and let you look at it first then decided if it'll fit or not.
In reply to Stampie :
I'm sure you hear it all the time: you're stuff IS NOT going inside my stuff! Consent denied!
Seriously, I'm running a GT25 and aiming to keep the car under 2k lbs. An old ebay Honda kit would be much more appropriate.
In reply to tb :
I'll look. I might have some smaller stuff around.
tb said:Long shot: Dodge 2.2 turbo engine wiring harness, anyone? Almost any variety is workable like '86 turbo1 or '87 turbo2 kinda stuff. I have a bunch of early turbo dodge computers and such and the L body parts to splice it up.
You would ask the week after I tow the trailer with the Turbo Dodge engine in it 4 hours away.
Hell, I would have sold the whole kit and caboodle to you for my price. I would think that even Stampie would find it hard to find a full engine and transmission for $1
In reply to Mr_Asa :
Story of my life, shoulda been here yesterday...
Michael has dibs. It's on some kind of slider
In reply to maschinenbau :
Unfortunately not a match to the other one that I have. So I'll send it to the next guy in line that needs it. Thank you sir.
Dusterbd13-michael said:In reply to maschinenbau :
Unfortunately not a match to the other one that I have. So I'll send it to the next guy in line that needs it. Thank you sir.
You got pics of the one you have? Is it one you got from me?
In reply to Dusterbd13-michael :
Looks like that is me. Assuming I fit in it, I am going to take it.
In reply to wvumtnbkr :
The one i got from you was an ultrashield. Im currently running that as my passenger side seat. It'll fit me great when i lose a little weight. Im trying to match the kirkey intermediate roadrace im using on the drivers side, just because I'm vain.
Dusterbd13-michael said:In reply to wvumtnbkr :
The one i got from you was an ultrashield. Im currently running that as my passenger side seat. It'll fit me great when i lose a little weight. Im trying to match the kirkey intermediate roadrace im using on the drivers side, just because I'm vain.
Just quoting for the awesomeness.
Free to a Challenger:
RX8 seats - Patrick G got em
Rams horn manifolds OE 91 Corvette
Rams horn headers - Patrick G as well
In reply to QuasiMofo (John Brown) :
Text sent re: seats and stainless headers
In reply to Patrick :
Done.
Expanded metal aka stretch metal, the stuff commonly used to back plaster in old-school construction. I could use 26" long by 7" high. Need to make a grill to protect exposed lower radiator. Thanks y'all!
In reply to AngryCorvair (Forum Supporter) :
I may have a chunk let me check the garage
In reply to AngryCorvair (Forum Supporter) :
I've got some expanded metal you're welcome to. It's heavier than the plaster stuff and the long dimension of the diamonds would be oriented vertically. Holes are big enough to put my thumb in.
AngryCorvair (Forum Supporter) said:Expanded metal aka stretch metal, the stuff commonly used to back plaster in old-school construction. I could use 26" long by 7" high. Need to make a grill to protect exposed lower radiator. Thanks y'all!
I got some stuff that I use for exactly this on my racecar. I'll pack it.
In reply to wvumtnbkr :
Perfect, looks like someone already raided my stash
Anyone got an electric, black faced oil temp gauge? Preferably autometer, w 1/16?
Didn't I give you a Longacre one?
Thanks y'all!
wvumtnbkr said:Didn't I give you a Longacre one?
Yes you did! Forgot about that one....
Need to grab a sensor!
You'll need to log in to post.
