I talked to quite a few people about challenge priced 120pph injectors. Blair was actually the one that found them. He just asked if I would flow them for him. Yes they are advertised as 1000cc 80 pound injectors (which is conflicting information). I have bought multiple sets and they all flow around 120pph.
Just as a note, I would definitely have them flowed or rig up a flow bench if you intend to use them. I had one that was slightly low on the one set I bought, that was strategically placed close to the feed line.
They worked well enough to make a Vortec 4200 go 10s, and a Turbo LS go 9s. Wish we would have had more time to show you all what they are really capable of.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F123599009463
Patrick
MegaDork
10/28/19 8:25 a.m.
The better deal is if you get the v10 kit that costs the same but comes with 2 extra injectors for flow matching and prorating purposes. (Stampie you have 10 of these)
for non challenge purposes i bought actual siemens deka injectors.
good info, thank you for sharing these. i believe i know someone who might have a used set from when he upgraded to 100lb.
Stampie
UltimaDork
10/28/19 11:20 a.m.
Patrick said:
The better deal is if you get the v10 kit that costs the same but comes with 2 extra injectors for flow matching and prorating purposes. (Stampie you have 10 of these)
for non challenge purposes i bought actual siemens deka injectors.
Yes I know but didn't want to brag.
Do you have any other go to eBay parts such as a fuel pump?
Patrick
MegaDork
10/31/19 7:51 a.m.
In reply to Andy Neuman :
My $140 speedmaster ebay fuel pump lasted 2 challenges and about 20 street miles. I have a couple links saved at home that i'll send you. Replaced the ebay pump with a similarly priced DeatschWerks one from summit racing a couple weeks ago.
Thank you for the link. Calvin can we get a breakdown or even a build thread on your injector flow bench?
