Challenge Swap Meet?

Sorry I have been in a bit of a dense fog in the real world but is there currently a thread for people who are bringing or need things brought for a swap meet? 

If not I am trying to bring the following:

2000 Corvette LS1 M6 whole or part out. 

I have a complete body, engine, wheels with brand new tires, the frame is rusted.

I would prefer to roll it on to a trailer and roll it back off but I know it's worth more parted. 

So here is the run down:

Whole vehicle with title minus wheels and tires $2600 with $2900

Wheels and tires $500

Rear bumper $75

Rear lamps $40 for set

Quarter panels $100 ea

Doors $300 ea

Rear hatch $200

Acrylic roof, minor flaws $200

Front fenders $100 ea

Front bumper $75

Hood $100

HVAC control $100

Instrument cluster with good HUD $200

Seats $50 ea

Dash assembly $150 with factory stereo and bezel $300 with factory stereo, bezel, double DIN stereo and bezel.

Front suspension complete rotor to rotor with steering rack and column $500

LS1 engine assembly $1250

Rear suspension complete rotor to rotor with rear differential, transmission and torque tube $1000

New in box brake rotors and pads $150/axle

EDIT VEHICLE PENDING SALE 3/5/25

Parking lot Unbuild!

ACES EFI 800hp Cathedral Port fuel system. 

Intake, throttle body, 100lb injectors, rails, harness, ECU, 7" screen, hot coils, ignition cables and more. Everything to start and run minus a 340lph pump. 

ACES p/n AS20111-WK102-AM2025B to compare with. 

Complete, new in box $1200 at the Challenge.

Universal T3 turbo NIB $75

Really nice Treadstone OG charge cooler $150

Tons of piping and couplers $100 (two kits worth maybe?)

Mamba boost solenoid $50

In reply to QuasiMofo (John Brown) :

I really don't need another vehicle sitting around, but what would be the price for the C5 not including the ls1 or the wheels and tires? 
 

Also I won't be going to the challenge,lf this is a challenge only deal. But I live near Findlay Ohio, which is right off I75. 

Couple of monster intercoolers, and an aluminum radiator. Assuming we have room in the corolla around Brian's wheels and tires.

Quasi - I would appreciate if you could look at this thread?

https://grassrootsmotorsports.com/forum/2000-challenge/grm-express-limited-slip-diff-from-grand-rapids-mi-to-the-challenge/276722/page1/

QuasiMofo (John Brown) said:

Universal T3 turbo NIB $75

Really nice Treadstone OG charge cooler $150

Tons of piping and couplers $100 (two kits worth maybe?)

Mamba boost solenoid $50

 

 

Might be interested in the piping and couplers.  Sizes? (Rough)

In reply to Mr_Asa :

Can you make it to Kalamazoo over the next few weeks?

In reply to QuasiMofo (John Brown) :

I'm in Tampa, Akylekoz is up north near you.  I can PM him and see where he can get

Somebeach (Forum Supporter) said:

In reply to QuasiMofo (John Brown) :

I really don't need another vehicle sitting around, but what would be the price for the C5 not including the ls1 or the wheels and tires? 
 

Also I won't be going to the challenge,lf this is a challenge only deal. But I live near Findlay Ohio, which is right off I75. 

The frame is completely fooked. It is 100% not reusable. I was going to C5Kart it until I pressed my hand through a section. I'm happy to sell the whole thing or chop this shipbox up while parting it out 

Dusterbd13 said:

Couple of monster intercoolers, and an aluminum radiator. Assuming we have room in the corolla around Brian's wheels and tires.

I think I already have dibs on an I tercooler coming to the challenge, but another one might be good!

I need cheapish, but good turbo stuff.

External wastegate, boost controller, couplings, intercooler piping, etc.

This is for a gt3582 turbski on a gm 3.9 v6.  Goal is just 400hp.

QuasiMofo (John Brown) said:

Somebeach (Forum Supporter) said:

In reply to QuasiMofo (John Brown) :

I really don't need another vehicle sitting around, but what would be the price for the C5 not including the ls1 or the wheels and tires? 
 

Also I won't be going to the challenge,lf this is a challenge only deal. But I live near Findlay Ohio, which is right off I75. 

The frame is completely fooked. It is 100% not reusable. I was going to C5Kart it until I pressed my hand through a section. I'm happy to sell the whole thing or chop this shipbox up while parting it out 

Mostly I have been keeping an eye out for a cheap corvette T56, but if the whole shell (minus the engine)  isn't much more than the T56 combo it might be worth it to have the front suspension parts and any other random bits. 
 

Do you come through northwest Ohio on your way down to the challenge? 
 

How much you want for the whole C5 minus the engine? 

In reply to Somebeach (Forum Supporter) :

Give me a call tomorrow after 3:30 269-2o3-64o3 or drop an email to quasimofo at gmail.com. 

We can work something out.

In reply to wvumtnbkr :

Rob do you already have the turbo?

In reply to QuasiMofo (John Brown) :

I have fallen in to the business of welding up rusted frames lately.  Maybe I'll check out the C5 when I drop off an 8.8 LSD for challenge delivery.

In reply to akylekoz :

No problem Tony. 

Let me know when you are thinking of making the trip 

QuasiMofo (John Brown) said:

In reply to wvumtnbkr :

Rob do you already have the turbo?

I do not have a turbski yet.  However, I believe that one would be a bit small.  If I have identified it correctly, that is one that would work on a smaller displacement engine (like a 3.0 liter at biggest).

I am interested in the intercooler piping!

In reply to wvumtnbkr :

The website page for the unit

I am looking for a project/basketcase adult size ATV 2wd chain driven.  Nocones has one but getting it down here is proving difficult.  Anyone have one that they feel should go to an unloving home?  Or anyone that can relay his from central IL?

In reply to Stampie :

Robbie is bringing his truck.  I know he mentioned driving Red, but might be bringing a backup trailer just in case?

In reply to Mr_Asa :

Tya I'll ask him.