13" Kiezers 4x100

I bought them new in '92 so they are the good and strong ones made before the guy died in the plane crash and the new owner started making subpar centers.

Four 13" 3 piece sprintcar wheels. About 6.5-7.5 lb weight depending on config.

Four centers with steel lug inserts. 4x100. Two centers are stock and two centers have been machined on the outside too so the halves can be mounted on either side allowing for 1/2" backspace increments.

Four 5" backspace rear halves, Six 2" front space front halves, four 3" front space front halves.

Comes with all hardware and o-rings (hardware is standard grade 8 available at any hardware store, most do not use the o-ring since it leaks and just seal with silicone before mounting tires)

Assemble however you want. When I ran CSP I did 8" rear with 5" backspace and 7" front with 5" backspace. When I ran DP I did 7" all around with 4.5" backspace in the rear and 5" backspace in the front.

$600 OBO for all.

Willing to part out some of the outer halves since I have extras or also sell just 2 complete wheels.

in roswell, GA

bump.

Season is starting soon!

trades considered.

are you willing to ship? I'm interested, just worried what shipping would cost, if you'll even do it.

Doh! I suppose a zip might help. 03301, business location.

Those look really nice.

wonder if these clear stock Saturn SL2 brakes...

oh those are cooooool
I bet they would look amazing on a z.....
I don't think we have enough budget for that though=/

Isn't a Z 4x114.3?

^^^ yes they are. I have a set of Datsun "windmills" in 15x6 or 7 that i bought for an MGB that is long gone. . .

bummer. didn't know what bolt pattern i was working with..
I'm guessing an fc would be 4x100 probably?

>>are you willing to ship?

I'll ship but no idea what the cost would be. They are not boxed yet so without looking it up I would quess probably somewhere around $50??

>>wonder if these clear stock Saturn SL2 brakes...

They clear Miata NA 1.8 brakes

I will have to measure mine, because if you have outers that could make my 13x8's wider, I'm interested.

mw wrote: I will have to measure mine, because if you have outers that could make my 13x8's wider, I'm interested.

I doubt my halves will make your wheels wider as they typically only come in 1" increments. My set does have two centers machined so that the halves can optionally be mounted on the opposite side giving 1/2" less offset (ie a 4.5" backspace instead of a 5" backspace) giving a wider track.