logdog
HalfDork
3/23/13 6:57 p.m.
Due to a recent mental breakdown, everything VW must go! All prices are cheap but negotiable. The more you buy the more you save!
Scirocco 16v trans. Came from an 87. 50 bucks.
The stuff you need to put MK3 brakes on a MK2. Pulled off a Golf 2.0 but never installed. 40 bucks
2 8v valve covers and an oilpan. Straight and not beat up. All 3 for 5 smackers.
More to come as I get more pics uploaded
I'll take the trans! I'll send you an email for address and/or a time to pick up.
Knurled
UltraDork
3/23/13 7:36 p.m.
Will take valve covers if you still have them the next time I'm in Michigan.
Disclaimer: The next time I'm in Michigan will probably be the May rallycross at the very, very earliest.
logdog
HalfDork
3/23/13 7:51 p.m.
Knurled wrote:
Will take valve covers if you still have them the next time I'm in Michigan.
Disclaimer: The next time I'm in Michigan will probably be the May rallycross at the very, very earliest.
Maybe it will work out. Maybe I will get lucky and when word gets out about them there will be a bidding frenzy!
logdog
HalfDork
3/23/13 7:58 p.m.
These are sold
I believe these are Venolia 16V pistons. I didn't buy them. They came with a former project. I do not see a part number anywhere. Due to the mystery factor, how about 25 clams?
logdog
HalfDork
3/23/13 8:03 p.m.
6 of the center caps are sold
Bag o'emblems and center caps. Pimp that toolbox! 5 bucks? A couple Almond Joys. Whatever.
Any chance you have a mk3 2.0 gauge cluster?
logdog
HalfDork
3/23/13 8:13 p.m.
Wheel Cylinder is sold.
Brand spankin new wheel cylinder for a Mk2. 5 bucks?
2 store brand O'reillys oil filters for an 8v. Get one free when you buy something. Or purchase for one Slim Jim each.
logdog
HalfDork
3/23/13 8:23 p.m.
G60 calipers. Came from a 1989 Audi 200. You can have the biggest brakes on your block with these bad boys. 60 G. Washingtons!
Slides and pistons move real nice and smooooth
Previous owner painted them racecar red.
logdog
HalfDork
3/23/13 8:32 p.m.
2.0 ABA block. Its been to the machine shop and checked out/honed. Comes with all the stuff to put it back together. Gaskets, bearings and the pieces from Bahn Brenner to put it in a MK2 with a 1.8 head. There are over 700$ in receipts. I will dig them out and post all the included parts later.
150 sound fair?
SVreX
MegaDork
3/23/13 8:49 p.m.
MK 1 round headlight grill/ front clip parts??
logdog
HalfDork
3/23/13 9:10 p.m.
SVreX wrote:
MK 1 round headlight grill/ front clip parts??
Just a grill. One nut on the emblem is broken. The other clips are in good shape.
SVreX
MegaDork
3/23/13 9:19 p.m.
Oh crap- I was hoping you'd say no.
How much?
SVreX
MegaDork
3/23/13 9:30 p.m.
Yes, it sounds fair. Know anyone going to the Mitty?
logdog
HalfDork
3/24/13 7:21 a.m.
SVreX wrote:
Yes, it sounds fair. Know anyone going to the Mitty?
I don't think I do. Want me to put together a shipping quote?
I will find something to use those pistons on some day!
SVreX
MegaDork
3/24/13 8:26 a.m.
logdog wrote:
SVreX wrote:
Yes, it sounds fair. Know anyone going to the Mitty?
I don't think I do. Want me to put together a shipping quote?
OK.
How far south are you in MI? I know a couple of guys from OH headed to the Mitty.
I can bring it, NW Ohio, I am often in Bryan OH. Currently based in Van Wert.
logdog
HalfDork
3/24/13 8:34 a.m.
SVreX wrote:
logdog wrote:
SVreX wrote:
Yes, it sounds fair. Know anyone going to the Mitty?
I don't think I do. Want me to put together a shipping quote?
OK.
How far south are you in MI? I know a couple of guys from OH headed to the Mitty.
Im in Imlay City. Its roughly 2 hours north of Toledo
John would be closer and is coming with us to the Mitty