Ok need to make some space for new projects. All parts are OBO + shipping. Forgot some Early Rabbit GTI parts, so they are listed at the bottom of the page.
Miata NA 1.8L Parts
-
cylinder head - does not have an exhaust cam but otherwise complete. For a 1.8L NA $50
-
stock exhaust manifold - 1.8L - $20
-
NA chassis/cockpit brace - has all bolts and covers - $20
-
ported throttle body - Bolt on one gajilibnilionnnn horsepower with this baby I hand ported this myself. Didn't notice any major gain so took it off for my race class. - $10
-
springs (4) from a 93LE but will fit 90-97. I bead blasted and repainted them black and used them for about a year. - $30 for the set
-
springs from a 94' two fronts and one rear. $20
-
NA ashtray - $5
-
NA 1.8L intake manifold that I cut down to make my own ITB setup. FREE but you pay to ship.
-
NA tan soft top cover good condition. $50
Audi/porsche KKK turbo - SOLD
Toyo R888's - 205/50/15. I bought these from Berget Race tire for $75 each late this June and used them for two 20 minute sessions at Summit Point this July. $200
Enkei RPF1 wheel with Hankook RS-212 195/50/15 tire. The wheel has a small nick in two of the spokes but is otherwise in great shape. The tire has about 60% tread left. Offset is 35mm and 4x100 pattern, the color is silver. $100
CR125 Dirtbike parts
-
Rear Shock for 99' that has been reworked by racetech. I don't know the valving or spring rate. $25
-
Rear shock for a 99' all stock. $20
-
Renthal aluminum bars $10
-
99' Front forks w/triple tree(expect to need fork seals) $50
-
99' rear wheel with used tire and brake rotor. $50
-
Rear brake master cylinder/lever/caliper/line/reservour sets. I have two complete sets - $20 each
Rabbit GTI parts
1. leather wrapped 4 botton steering wheel in good shape, with GTI logo. - $25
2. Neuspeed upper front strut bar. $40
Its best to call if you have ?'s as I don't get much computer time anymore. 412-974-5695
If you want to pick up items your welcome to, or for bigger stuff I am willing to drive and hour or so from Monroeville, Pa. to help deliver.
Thanks
Paul
If it were a Turbo Ashtray instead of a Normally Aspirated one I would want it.
(shout out to Pittsburgh area!)
pinchvalve wrote:
If it were a Turbo Ashtray instead of a Normally Aspirated one I would want it.
(shout out to Pittsburgh area!)
Pinch, a roll of gaffer tape + ashtray + turbo =
how cut down is the intake mani? How much shipped to Boston, MA 02132? I got some GSXR1000 throttles I was gonna see if I could fit onto a miata intake mani.
I am intrested in the KKK if it is a 26 I need to know exactly what one it is. - Shipping for the KKK is 01754
In reply to RoadWarrior:
It is cut down so that 600/1000 gsxr ITB's can be added to it with just some little straight silicone hoses. You will need to do some final fitting, but this is a really good start. If you send me your email I will send you a pic of them. I would think $8 should cover shipping.
Let me know
dean1484 wrote:
I am intrested in the KKK if it is a 26 I need to know exactly what one it is. - Shipping for the KKK is 01754
It is a K26 definately. Shipping looks to be about $15.
Thanks
Paul,
Paypal sent two days ago.
In reply to dean1484:
Hi Dean, I didn't receive anything yet. Could you please check the address you sent it to. Should be
paulpetrun@yahoo.com
Thanks
Paul
if the kkk isn't gone yet, I'll take it, have money in paypal.
Andrew
JohnV
New Reader
10/23/10 9:35 p.m.
If you still have the ITB intake, I'm interested.Thanks, John
red5_02
New Reader
10/25/10 6:28 p.m.
Where are you located, I'm interested in the tires.
red5_02 wrote:
Where are you located, I'm interested in the tires.
Just outside Pittsburgh, Pa. I am willing to drive an hour or so to help with delivery. Only catch is it has to be done before 11/1/10. I am going in for a new knee and won't be able to drive for a few weeks!
Thanks
Paul
JohnV wrote:
If you still have the ITB intake, I'm interested.Thanks, John
Roadwarrior has shown interest and has dibs, but if he changes his mind I'll let you know shortly.
Thanks
Paul
red5_02
New Reader
10/26/10 10:16 a.m.
paulmpetrun wrote:
red5_02 wrote:
Where are you located, I'm interested in the tires.
Just outside Pittsburgh, Pa. I am willing to drive an hour or so to help with delivery. Only catch is it has to be done before 11/1/10. I am going in for a new knee and won't be able to drive for a few weeks!
Thanks
Paul
Noted. I'll let you know.
In reply to digdug18:
The turbo and cut down miata manifold have been sold.
Offers on anything else will be considered.
Thanks
Paul