Javelin's winter garage clean-out

Trying to make space in the garage. All things are in Kelso, WA about 45 miles north of Portland. I can meet you in the area or arrange shipping for anything. Make offers as I need the space way more than I need the money!!!

1. Set of 4 205/50/17 Toyo Proxes T1-R tires. 2 @ 20-25%, 2 @ 40-50%. Bagged and ready, $155-175 each new. $50 for all four.

2. Set of 3 13" 4-spoke Cragar S/S knock-offs. Two are a matched set in like 13x10. I can provide pics/measurements. One is a 13x8-ish. They have chrome hoops and cast-looking centers, uni-lug. Perfect to mount cheap drag slicks on for your Challenge Miata or RX-7! $25 for the pair and $5 for the hose-reel one.

3. Set of 4 14" Hayashi Street II 4-spoke aluminum wheels in early Mazda/RX-7 4x110 bolt pattern. Extremely rare in the US and super light (26# each with tires!). Polished lips, bare cast centers. Currently have 75% tread Barum Bavarius directional-tread sports tires on them. $400 for the set (note: UPS says it will cost $40 each to ship cross-country, so it'll likely be between $500-$560 for the set shipped depending on where you live).

4. 2001 P71 Intake tube to TB and airbox with snorkus and filter. Makes 10HP over a P72/MGM/TC setup. Usually sell for $50 on eBay. $25, complete.

5. 2005 GTO LS2 flywheel, used. Should be turned probably, but looks great. $35?

6. Unknown vintage SA/FB RX-7 5-speed manual trans, complete with shifter, etc. Came out of an 82 GS which had an 84/85 GSL swap. Worked great! $50

7. 84/85 Mazda RX-7 GSL front strut/suspension upright assemblies with KYB adjustable inserts! $50 for the pair.

8. Random SA/FB RX-7 parts: Interior trim, wiper motor w/linkage, steering pieces, ignition pieces, and switchgear. $25 for all of it. I'll throw in a wiper-less rear hatch glass free!

9. 1970-1976 AMC Hornet Coupe headliner in light cream, near perfect, $10.

10. 92-2011 Ford Crown Victoria Police Car rear seat. Plastic. Has arm cutouts for when you're cuffed. Came out of an Oregon State Police P71. With brackets. $35

11. 5x130 Porsche spacers, set of 2. About an inch wide, with studs. (I can measure exactly). Aluminum, look to be factory pieces. $35?

12. 1990's Invader Go-Kart. Blue, 5.5HP Tecumseh engine, less than 75Lbs. Goes like stink! Has gravel/dirt tires on it. New chrome steering wheel, slipper clutch, and chain. Rebuilt carb. $500 obo?

Think the tires would fit 8.5" wide rims? ;) Probably not, know anyone that has a set of 225/45 17's?

My Uncle lives in Yacolt and races a 1st gen RX-7 in SCCA/CSCC. I'll see if he's interested in any of the RX-7 parts.

Good luck with the sale.

The tires are off of the Mazda5, which has 7.5" rims IIRC. They are an odd size, that's for sure.

Got any 944 parts you want to trade away?

Yeah, wouldn't want to try and put them on the 8.5's, I hate that overly stretched look (though cantilever slicks look so right to me, heh) Might find a use for them though, dunno.

I still have that set of 220lb front lowering springs. A pair of steel rear arms, spring plates and stock torsion bars from a 924 and a pair of 944 torsion bars, plus stock CV joints and axle shafts.

Late model rear stub axles and hubs (late offset) took them off my aluminum rear arms to replace them with early offset parts to fit my existing wheels.

Yeah, the front springs would be the only interesting thing to me out of all of that...

damn i wish you were alot closer, id get the tires for sure. save me some money in having to get tires for the stockers til i can afford some tires for the 17"

Bump-a-dump.

I can work with you on total price + shipping.

Like I said, I need SPACE, not money...

Send me some pictures of the Porsche spacers. Did they come with your 944?

They were on one of my 3 free 928's that are now being made into Chinese scooters.

pm sent.
these tires are a little closer to stock overall size, even though stockers are on 15", so maybe the alignment wont be too screwed up and I can get away without buying cam bolts..
lol
look forward to hearing back from you about them asap

PM replied to!

I'd be interested in the KYB's but I imagine shipping would be a killer. Maybe just the strut without the upright?

Shouldn't be too bad for UPS ground. Besides, then I can schlep almost all of the other RX-7 stuff. Wanna package deal?

Ugh. More stuff is about the last thing I need.

Those Cragars sound like they would look pretty good with the slicks I have for the Spitfire.

reply replied to. lol

Oh any pics of the Cragars?

Well poop. Turns out I suck at measuring wheels with tires on them. All 3 Cragar's are 13" x 8". 18Lbs without the tire.

The Hayashi's are 14" x 6.5" and have 195/60/14's on them.

I might take the 13" wheels, sent you a message.

Bryce

PM's replied to.

Everything still available, no takers yet.

Cragar knock-offs:

My garage ain't empty yet! Make offers, I'll most likely take them!

ALL of it is still available! I've had no less than four CL flakes waste my time already last week. I want this stuff gone, now. Will accept all reasonable offers!

PS - Bryce, I even brought the Cragar wheels to Vancouver to meet a guy who never showed. They're currently clogging up my M-I-L's garage. If you come up there to grab them I'll give them to you for $20. Let me know!