Spring cleaning v. Miata parts and 2.5" coilover springs

I have a hard time walking through my garage. I have lots of things i'll never use. Here's the start of it. I will try to update 1-2x a week with more stuff.

Here's what we have to start, though.

Prices do not include shipping. All parts will be shipped USPS Priority Mail unless otherwise requested.

Bose headunit from 2000 SE - $50 Working when pulled, all buttons work, all lights work. No huge gouges, all lettering still clear.
2000 SE Bose by concealer404, on Flickr

2000 SE wood radio/shifter bezel - $100 All clips intact, no cracks. Some scratches around the cig lighter. Good shape otherwise. Price reflects scratches.
2000 SE fancy schmancy door sills - $150 Intact. Driver's side metal has two small dents. Scratches consistent with 16 year old trim pieces, nothing crazy. "Miata" sticker is faded, but still readable. Easy "restore" project or dump them in as is.
Rear hardtop plate thingies WITHOUT frankenstein bolts - $20
Rear hardtop plate thingies WITH frankenstein bolts - $40 One of the frankenstein heads came off the stud when i pulled this. Couldn't be bothered to mess with the stud. Stud should be cheap to source online or maybe you have a spare.
Various by concealer404, on Flickr

Z34 Lumina Hood vent panels, complete - $80 Self explanatory. Period correct venting goodness project? Lumina Z34 vents, complete by concealer404, on Flickr

10AE Fog Light Bezels - $75

Added NB1 fog light bezels and boost gauge goodness.

Fyi you can get brand new qa1 springs from summit for $75 as well. Im looking for new spring rates but I guess im looking for "super challenge friendly". Sorry if this isn't allowed just giving a heads up.

Well i'll be damned. Seems they've dropped their price. Those are pending in trade for parts, though. Will update listing.

Im interested in the 375lbs springs, I tried to PM but it didnt seem to work.

Well poop. I literally just opened this thread to update all springs as sold.

More stuff! (Prices are plus shipping.)

NB Miata Gauge hood, all clips intact, great shape - $50
Ultra Racing 2nd gen Focus front tie brace, brand new - $125
RSpeed stainless steel door sills for 90-97 Miata. Good shape, discontinued awhile back as far as i can tell. - $50

20150607_204311 by concealer404, on Flickr

Fuelab -6AN inline filter. Believe part number to be 81801. Same situation as above. - $75

Fuelab filter and afpr for sale by concealer404, on Flickr

MORE.

Begi cold air box for NA - $75
Mallory HyFire 6A ignition box - $100 (I may have a tach adapter as well for additional monies, will post if i find it. Buyer of Mallory box gets first dibs on tach adapter)
Moroso vented catch can - $60 (came off of Swank Force One, so you know it's good)
"Cusco" non-vented catch can - $30

20150608_201203 by concealer404, on Flickr

Sold some things. They have been removed.

More stuff!

Intercoolers. 1988 MX6 GT - $40, OEM SR20 intercooler w/ bypass valve - $50
20150615_185541 by concealer404, on Flickr

Mizu S13 240sx silicone radiator hoses. Brand new. $65 on amazon. $40 from me.
20150615_185553 by concealer404, on Flickr

Uncracked 93-97 MX6 LS foglights - $40
20150615_185556 by concealer404, on Flickr

Rockford Punch 160x4 amp w/ original box and birth sheet. Great condition. $100
20150615_185606 by concealer404, on Flickr

2004-2005 Mazdaspeed Miata MAF - $30
20150615_185610 by concealer404, on Flickr

Sunpro boost gauge - $10
Dual EGT gauge w/ thermos and wiring harness. Has been cut, easy to re-connect. $75
20150615_185621 by concealer404, on Flickr

Autometer ATM-4337 Sport-comp water temp gauge. BNIB. - $40
2x Autometer 20psi boost gauges - $10 each
Autometer 30psi boost gauge - $10
Glowshift digital boost gauge, no sender - $5
20150615_185625 by concealer404, on Flickr

Remains of a 3rd gen Escort ZX2 Energy Suspension Master kit. Has at least a complete 4 corner endlink setup (4 bushings replaced with delrin), sway bar bushings, and i believe front control arm bushings. What you see is what you get. $40
20150615_185629 by concealer404, on Flickr

Pierce Motorsports 91-97 Escort hatch harness bar/B-pillar brace. May fit others. $125
20150615_185616 by concealer404, on Flickr

Also: Can i get a thread title change? I don't have any more springs for sale, but i have many other things.

I'll take offers/cut deals for Challenge competitors. I need this stuff out of my hair, and i need to buy a bike. Let's do this!

Got my eye on the EGT gauge and a boost gauge, but trying to wait until I get the truck running before I buy a ton of crap for it. How do the EGT probes mount? Weld-in bung?

Also, what's cut exactly? The thermocouple leads, or other wiring to the gauge?

Yep weld-in bung. Cut at wire coming out of gauge.

I'd be more than happy to re-attach on request but figured that it might be easier to deal with during install, for ease of install if more length is needed for some reason.

Because i'm a salesman trying to finish a car, i'll eat shipping and paypal on whatever you want as long as you buy that egt setup by end of the weekend.

I might have better pics around somewhere from when i picked the egt setup up, and/or i can take more.

Bumpage. Open to offers, especially on more than one item.

When are you sending me the Saturn strut tower and sway bars?

Next couple days because i suck at life and haven't found a box that works. I'm going to have to make a something.

It's a metal bar! The post office can't destroy it... oh wait... yes they can... carry on!

I mean... i COULD just wrap the whole damn thing in bubble wrap and tape and then see what happens. Want me to try?

It wouldn't be the first time I've shipped something like that. Wrap both in bubble wrap individually and secure with tape, then wrap both wraps in bubble wrap and secure with tape. Smother the shipping label in more tape and maybe some bubble wrap. Then pop them all at the post office while screaming allahu akbar. Should work fine.

Maybe i'll try screaming "Obama! Obama! Barack Obama!" instead.