This clean and frequently complemented SCCA Improved Touring race car began its re-purposed life as a one owner Florida daily driver ‘90 Black CRX Si and was transformed into the car before you. As the original owner and builder of the race car all of its build and track history is known. Only one double event has been on the OPM built motor. Double axle open trailer is also available as a package deal. Located in Jacksonville, FL. Asking $5,990.
Also listed here with additional photos: https://www.racingjunk.com/Improved-Touring/184073677/Well-Sorted-ITA-Honda-CRX-Si.html
SCCA ITA log book (needs updated inspection)
2200lbs with driver, empty fuel tank and 135lbs floor mounted weight plates
Engine and Transmission
SCCA IT spec D16A6 Si motor built by OPM Autosports (detailed invoice available)
Custom OPM Autosports 4 to 1 header connected to 2.5” mandrel exhaust with high flow resonator (meets noise regulations)
B&M fuel pressure regulator
Fuel test port
Driver accessible master cutoff
Double core aluminum radiator
NGK plug wires
Exedy clutch disc
Suspension and Brakes
1 Set of Team Dynamics Pro Race 13x7 10lbs wheels (225/50)
OEM Honda remanufactured brake calipers all on corners
Brembo blank rotors
Hawk Blue 9012 front pads, Raybestos stock rear pads
Goodridge stainless steel brake lines
OEM Honda suspension bushings
Mugen rear trailer arm bushings
Koni shortened and revalved adjustable shocks
Eibach Race springs 600F/800R
Coilover sleeves
Suspension Techniques adjustable 20mm rear sway bar
OPM Autosports solid front radius rod bushings
Front camber adjustment solid eccentric bushings
ARP extended wheel studs
1 set of 5mm aluminum rear wheel spacers
Safety
SCCA certified custom 6 point .120” DOM welded and gusseted roll cage with door and under dash cross bars
Passenger and driver door glass retained with .060” aluminum panels
M&R window net
Cobra kevlar FIA spec seat on custom 5mm aluminum side mount brackets
Scroth 5 point harness with 2 to 1 anti-sub (out of date for SCCA and NASA)
MOMO suede steering wheel
Other
AMB transponder
Removable front air dam
Cage mounted radio box with headset wiring and PTT button
Cage mounted camera or GoPro mount
Spares and Parts
3 Complete L3 transmissions
1 Complete DX cylinder head for parts
1 rear center “CRX” trim piece
Numerous engine parts sourced from other D series engines
2 sets of OEM Si wheels