When we first picked up our 1994 Miata, we were completely enamored with the car's sharp handling. We considered using the car as a platform for an E-Stock autocross effort, but couldn't resist the temptation for more power, so it become the test subject for a Flyin' Miata turbo kit installation.
We recently upgraded the suspension as well, and careful setup has led to a really fast little car that still works well as a daily driver. In fact, we think our project might be the fastest daily-driven autocross car in the country.
To prove our claim, we're going on a road trip. Our quest will take us from the sunny shores of Daytona Beach, Florida and across 1400 miles of America's heartland. When we reach Lincoln, Nebraska, we'll compete in the 2009 SCCA Solo National Championships.
Our Miata will compete against Vipers, Porsches, RX-7s and Corvettes in the SSM class at Nationals. This class is among the fastest at the event, and competition for the top spot is sure to be close. We don't really expect to come out on top, but we think we can finish ahead of the other daily-driven entrants at the event. If we're wrong, we'd love to find our more about the car and driver combination who are fastest.
As a final preparation for Nationals, we've given our Miata a layer of war paint. Well, war vinyl in this case; our car's new look comes courtesy of Bob Stephens and the crew at Bargain Signs in Clearwater, Florida. Our Miata's paint is still in good shape, so the idea of using a wrap makes good sense; it allows us to completely change the car's appearance while preserving the car's original paint.
We got a little creative with the wrap on our car, and the "High Octane" nose art is a particular highlight. The piece was originally painted by artist Peter Ledger at Castle Air Force Base in 1989, but the work was lost when the KC-135 that served as its flying canvas was deployed for the first Gulf war. We had a very personal connection with this portion of the Military community, so we asked Peter's widow, Christy Marx to reproduce Peter's work on our car. Peter was a motorcycle racer and lover of speed, so Christy agreed to let us reproduce
his original art from a photograph. Thanks, Christy!
The Bargain Signs crew did a terrific job on the design and installation of the wrap, using a simple squeegee and occasionally waving a propane torch to shrink the material into place. The process only took about 7 hours to completely install and should last at least 5 years, even if left outdoors under direct sunlight. The finished material is hard to identify as vinyl until you're within reach, and we loved having the freedom to make the car look however we wanted without risking the original paint. The vinyl is also easy to clean with water or a spray detailer.
We look forward to putting up our best effort at the Solo Nationals, so wish us luck for next week's big event. We'll try to have updates while we're on the road.