1 2
friedgreencorrado
friedgreencorrado SuperDork
1/26/11 7:53 p.m.

rusty02, are you talking about the wells on an 02 or an E21? I checked your profile, but I see you don't have your ride up on it yet (don't sweat it, lots of people don't ever do it).

TurboDogsDad
TurboDogsDad New Reader
2/4/11 6:13 p.m.

Not to hijack this thread, but I've been digging into my 72 2002 project, Dr SooS, soon to be chronicled on the FM site in a build diary. Anybody have a source for patch panels/rust repair panels? I've been digging all over Google and striking out. I just cut out my rusty spare tire well, replacing that with a flat sheet of 16 gauge (so far, the only cars I get flats in are the ones with spares, so I look at eliminating the spare as flat protection ;-). In that process, discovered some bondo in the bottom of the left quarter. This is difficult to weld to... Sources? Thanks!

ransom
ransom New Reader
2/4/11 6:22 p.m.

In reply to TurboDogsDad:

The first places that spring to mind...

Maximillian: http://www.bmwmobiletradition-online.com/

Walloth und Nesch: http://www.wallothnesch.com/e/frameparts.htm

2002 AD http://www.2002ad.com/storeworks/category.cfm?id=6

TurboDogsDad
TurboDogsDad New Reader
2/4/11 7:56 p.m.

Thanks, Ransom! Walloth und Nesch are dramatically less expensive than the other two, at least before shipping big awkward pieces across the ocean.

Mazdax605
Mazdax605 HalfDork
2/9/11 4:29 p.m.

How about this car instead?

http://forums.bimmerforums.com/forum/showthread.php?t=1602018

I am trying to get a hold of the seller now. What say you GRM enablers?

Junkyard_Dog
Junkyard_Dog Dork
2/9/11 4:38 p.m.

I think I need some "alone time".....

OK, I'm back. Bank account is still empty so I can't go buy it myself. Its maybe a tad pricey but not by much considering its rare, has lots of hard to find parts on it, and looks like it was basically restored. I can't believe that car was in Knoxville and I never knew about it (Thats where I had my 320i).

Consider yourself enabled

Mazdax605
Mazdax605 HalfDork
2/9/11 4:40 p.m.

If only the sellers helper would reply to me I would be one step closer to having it in my garage. Tr8Todd turned me onto it,and thinks it is worth the asking price. I will trust him on it as I know nothing about the prices on these cars as they seem to be all over the place.

-C

Junkyard_Dog
Junkyard_Dog Dork
2/9/11 4:50 p.m.
Mazdax605 wrote: If only the sellers helper would reply to me I would be one step closer to having it in my garage. Tr8Todd turned me onto it,and thinks it is worth the asking price. I will trust him on it as I know nothing about the prices on these cars as they seem to be all over the place. -C

By a tad overpriced I meant by by like $100. Not a lot considering there will be haggling anyway. Considering what I sold my car for and what it would take to make it look that good AND have a 6 cyl. it may actually be underpriced.

rusty02
rusty02 New Reader
2/18/11 9:19 p.m.
friedgreencorrado wrote: rusty02, are you talking about the wells on an 02 or an E21? I checked your profile, but I see you don't have your ride up on it yet (don't sweat it, lots of people don't ever do it).

Refering to a 2002. Mine were bad, and in a tough spot to get to.

92dxman
92dxman HalfDork
2/19/11 12:32 a.m.

I wouldn't kick those wheels out of bed! BMW, why can't you build awesome boxy cars like this anymore??

1 2

You'll need to log in to post.

Our Preferred Partners
CNy00Q3tvyjvkuCT9a3qgLtPqfThqTKEpF9pg1ZJwTLMRdJHumwOaJIukdNjXTNS