GRM $2014 Challenge Swap Meet

I have a turbo exhaust manifold from a 280zx that I can bring with me if anyone is interested.

Can someone mail me back a couple bottles of Sunny's BBQ (Original) sauce? I'll gladly reimburse you, there isn't one in WV and My Fiancé and I loved it!

Which flavor??? I work ~3 blocks from one?

Their Classic Regular BBQ... that sauce is killer!!!

Pair of 4 bolt ACVW 15x10 chrome wheels. $50

Set of 14" S13 wheels I was going to use on the Metro for daily driving but if someone needs them. $100

In reply to dansxr2:

I'll see what I can do.

edit: pm sent.

Thinking ahead for once.... Anyone has a spare unused/unloved/unwanted mega squirt lying on the bench and wants to part with it cheap I'm interested.

Also could use a pair of sporty/comfortable seats (corbeau brackets are readily available for trackers) at a challenge friendly price. Would prefer something that's reclineable to maintain rear seat acess.

I'm sure there is more as I'm hoping to start a miata rebuild next month. I've just got to check the parts stash to see what else I might need.

235/75-15 LT/all/mud terrain tires, I need 5.

I have an oem spec clutch with flywheel for a B series honda, $50 ill ring it just in case!

92 VW GTI.

It's a complete rust free car, but I'm parting it.

Can't bring the shell (no space for a whole car), but I can bring any part you want.

Any requests?

Paul, did you get my PM about the A568?

I did. My apologies.

I should have noted that I am hesitant to separate it from the engine right away. If I can't sell the engine, I'll be putting the Spirit back together.

I'll PM you a bit more info.

In reply to JohnyHachi6: I wish I was going... understand not wanting to ship them, I can separate the wheels from the tires if you just want the wheels, the shipping should not be too bad. They are on ebay, so I have to wait until the auction ends before I would be willing to sell the wheels separate.

I have a set of four 17x8 E46 Sport Wheels for $120.00 if anyone wants them. They are straight no bends but have some curb scrapes on the face. Would make a great square setup for cheap.

I have three of the staggered M3 motorsports wheels as well with mismatched tires. I think I have two fronts and one rear. All are in good shape with no bends. $150.00 for the three.

I also have a very nice set of M-Edition BBS 15x6 Miata wheels with Starspecs mounted up. I have the lugs and the center caps as well as the tool for removing the caps. $600.00 (they bring more then that on ebay, I just would rather not hassle with it)

I have a ton of Infiniti G20 P10 stuff, including 15 Inch T wheels with tires, 2.5 inch mandrel exhaust, lowering springs with adjustable shocks (Not sure brand off top of my head possible Tockico illuminas) Black leather touring interior (Great for B13 SE-R's), body panels etc...

I have a MR2 Spyder after market / muffler shop exhaust for $70.00

Random stuff if anyone wants it let me know if anyone wants it and I will toss it in the truck.

RH Camaro Z28 cooling fan, works Free

1 Hoosier A6 275/45R16 Free

1 Kumho V710 265/45R16 Free

1991 Teal Green Civic Hatch $10 1991 Teal Green Civic Hatch Rear Bumper Cover $10

ST Sway Bar to fit 1991 Civic, bar, brackets, no heim joints $50

Set of small chamber Chev 305 heads (68cc? 1978?) with fresh valves and springs that have sat under my workbench for a decade. I'm not going to the challenge but I'm a mile off I-75 in central GA, so a lot of you will go right by my place.

If anybody wants them bad enough to stop I'll take $25 or a case of Coors Light. They're probably not worth expensive beer.

Anyone have some mandrel 3” exhaust bends?

In reply to PseudoSport:

I may. Let me check my shop tonight. What angles are you looking for? Or just anything with a bend?

A 90 and a 45 would be nice plus whatever random scraps I can find. 90 is more important and I can make whatever else work. This years exhaust system is too small for my power goals so i'd like to fix it for $2015.

PseudoSport wrote: A 90 and a 45 would be nice plus whatever random scraps I can find. 90 is more important and I can make whatever else work. This years exhaust system is too small for my power goals so i'd like to fix it for $2015.

I think I have some 3" piping laying around. I will take a look.

Also, This is a long shot, but I upgraded trailers a while back and the hubs wsent from a 6 bolt to a 5 bolt pattern... weird, I know.

Does anyone have either a set of 16" trailer wheels (x2) I could buy or would be willing to trade x2 new trailer wheels and tires with a 6 bolt pattern for a 5 bolt pattern?

?anybody need something british ? datsun z ? mgb mga ? jaguar jag stash vid

Speaking of trailers, anyone have a POS trailer that would haul sub-4k lb cars? This area of Texas sucks for pricing and title availability. I may be delivering a trailer to the Challenge and would need something to haul the Metro back on, maybe even a cheap tow dolly?

Boy is it your lucky day. This is the trailer I got when I bought my first GLC. Picts (classic then relatively current) show the GLC on it. It has a leaky tire and may need them both replaced honestly but it tows great. The axle slides so you can adjust it to whatever load you want. I just don't know how I would get it to the Challenge as I'm already dragging one trailer. Text me if you're interested.

In reply to hobiercr:

I'm pretty sure my parent's will be in Zephyrhills between now and the challenge. I'm also pretty sure dad said he's taking the truck. If so, I can probably get them to drag it back up here if you're willing to bring it out to them/meet them somewhere.

I'll be happy to pay someone for the trouble of getting the trailer to G-Ville.

With that knowledge I'm sure I can get dad to help transport it up. He gets cranky about spending gas money.