I need to clean out some space.
Here's the deal. I will deliver anything to the Challenge, but I am not shipping at this point. Sorry.
First up, a very nice set of leather seats from an Eddie Bauer Explorer. I've got both the front buckets and the rear. No tears. Includes sliders, motors, switches, etc. They are embroidered "Eddie Bauer", so if you have a particular dislike for OJ Simpson, pass. I was going to use these in a Street Rod, but no more. $200 for the set.
Next, Miata engines. I've got 2 1.9L engines believed to be in good condition. Both include ALL accessories, just as they were lifted out of the engine bay. How about $200 ea? (Yeah, I know. That's a picture of only 1 engine. the other one is too buried in my Garage-de-trash-heap to get a picture. I'll dig it out if you buy it). (SOLD)
Surely SOMEONE has a home for these 4 cylinders of fury! This a a complete engine from a 1994 Dodge Spirit RT. It's a 2.2L TIII which has been bored out to a 2.5L. I bought it from a street racer, and it may have been the fastest car I've ever driven, according to my butt-o-meter. The only reason the engine came out was to replace a badly leaking rear seal, but then life happened. I kept having ideas of other things to put it in, and it never made it back into any car. It includes the 16V DOHC Lotus head, but not the turbo or exhaust manifold. All other accessories are intact. I've seen these heads go for $1000 pretty regularly- I'll take $1000 for the entire engine.
RX8 rear diff. Bought it, didn't need it. $100
Miata fuel tank. Pump is still in it. $75
Horizontal band saw. Needs guides, blade dull. $300
RX7 LSD rear end hub-hub- disk brakes, driveshaft, etc. $200
Pair of Miata seats. This one is good condition. The driver's one has a ripped bolster. Must buy both $75 for the pair.
Miata 5 spd tranmission. $200.
RX7 5 spd transmission. $150.
RX8 6 spd transmission. $400.
High pressure 1500 psi fluid reels. Include metering heads. I've got 6 complete sets. $250 per set. Buy 5, I'll give you one for free.
Rota Slipstreams. Barely used- 1 tiny scratch. Gunmetal finish. 17x 8.5. 5x 114.3. +48 offset. $400
Used clutch for an RX8. Good condition. $50
Used factory flywheel for an RX8. Good condition. $100
Brand new aftermarket chromoly RX8 flywheel. Never installed. No counterbalance. $200.
Welding helmet. Brand new, in box. Basic model- no self dimming. $25
Dremel scroll saw. Perfect working condition. $150.
New clutch for a turbo Dodge. $75
I've got more, but this post is too long. check back shortly, and I will post more.
Anybody want to do ITB's? Solex sidedrafts. Good visual condition. Jets, etc, unknown. All 4 for $600.
Next up: DOT reflector triangles. Good for anyone with an OTR business, etc. These are brand new, in cases. They've never been used (Thankfully). I have 3 sets. I'll take $15 per set. (1 SOLD, still have 2)
Refridgerant tank. I was going to put a valve on this and make a portable air tank. Free to whoever wants it. (GONE)
Ford Mustang 5.oL lower intake manifold. I've never had a Ford... How do things like this happen? $50
RX8 Rotors. Brand new. Non-sport edition (turns out mine is the sport edition) $50 pair
Recessed can lights. Used. Work fine. I have 7 of them. $15 ea, including the trim rings and bulbs (which might even work). Buy 5, I'll give you 2 free.
Commercial grade VCT. I have 9 boxes- 405 SF. Light grey. $100
I'll take the better of the 2 Miata motors.
In reply to dyintorace:
Sold.
In reply to dyintorace:
...but I think they are both fine.
NOTE: I am leaving for the Challenge Thurs morning. I will continue this thread until 9:00 PM Wednesday night. After that, I'm loading the trailer.
I want the air tank!
I am going to have to make a list of all the stuff I have claimed
In reply to singleslammer:
I'll bring it.
I drive a white F-250 with a utility cap on it towing an open trailer. Look me up.
What is the brand and model of the band saw?
What year are the Miata motors?
Cooper_Tired wrote: What year are the Miata motors?
1996, I believe.
singleslammer wrote: What is the brand and model of the band saw?
It's a Greenlee, but the tags are too worn for me to read the model.
I'll take a set of the dot triangles from you sir. POSSIBLY the other miata motor.
Spinout007 wrote: I'll take a set of the dot triangles from you sir. POSSIBLY the other miata motor.
1 set of triangles- I have 2 more. 1 Motor still pending.
OK, now for a few more things:
LS heads, complete with valves, springs, and retainers. These are aluminum truck heads, casting 706. They have a smaller combustion chamber for a small bump in compression over stock LS1 heads. $375 pair
LS truck oil pan. Aluminum, includes windage tray and pickup. $150
NA Miata upper intake and throttle body $75
Struts and springs. These were on my Miata which won 2nd place in the $2014 Challenge. They are an odd ball set, but do the job. If you are interested, ask. I'll get more specs. $75
Miata Exedy organic stock replacement clutch. Brand new. $125
Miata M-Pact upgrade High torque 6 puck clutch, ceramic disk. Brand new. $125
Truck bed liners. I have 4, brand new. They came from a Ford dealership I worked at. Rugged Liner Brand. I have the matching tailgate cover, but no top rails. $125 ea
Aluminum hood for an RX-7. $125 (SOLD)
2006 Mustang hood. $100
What generation rx7
In reply to markwemple:
Which part? I've got a variety.
I imagine the hood. I am interested in that too. Need one for an FC
The hood is from an FC (convertible, I think). No hood scoop.
My BIL (who is coming) wants the RX7 hood
For you RX7 fans, here's a complete pair of subframes hub-hub- includes brakes, linkage, half-shafts, hubs, calipers, etc. They are from an FC Turbo II. The rear includes an LSD. $250 for the rear, $100 for the front. Make me an offer- they are already on the trailer, and I'd like to not unload them!:
OK, that's a LOT of harnesses! Mostly 4 point, no submarines, all outdated. Good for off road buggy etc. I'll take $15 ea. If you are interested, ask. I will sort out the pile and give better details/ pics. Buy all of them and I'll give 2 of them for free!
singleslammer wrote: My BIL (who is coming) wants the RX7 hood
I'll mark it sold.
FYI, those Tokico's are originally for a MK1 Golf.
You'll need to log in to post.
