Well, let me know what you decide. Color me interested, especially if the interior is in good shape.
Well, let me know what you decide. Color me interested, especially if the interior is in good shape.
dug out 4 15x6 chevy truck rallys, 5x5 bolt circle. these technically are van rallys but if you are dying for that 70's look you could put a pair of 8" wide ones on the back(which i also have, and will sell) and 6" wide on the front and get some air shocks. $100 for the set of 6's, $50 for the pair of 8's. i have to check, may have enough 8's to make a set of 4, but have to keep 2 for impala drag tires.
5x5/5x5.5 22" venti v3 bounce rims. ghetto fabulous. 2 good(matching, 0 miles, few years old) tires, 1 horrible, 1 decent. 1 or 2 center caps. get a $500 b-body, donk it out, and go LeMons it on baller rims. $200.
progress is slow digging stuff out, as work is plenty, but i've been collecting boxes to sell and ship stuff by purchasing a bunch of new parts to get boxes.
Richard Nixon wrote: Well, let me know what you decide. Color me interested, especially if the interior is in good shape.
going to drive it for now as i'm down a couple rides while stuff gets fixed.
71 monte carlo body shell(one door, no front end) with solid frame and 12pt cage, no floor. rolling on casters. just picked up from another grm'er, then while there made a deal on what is to be my $2015 car, so this one has to go. this is a huge project. it does not have any suspension. it needs to go ASAP, like one week tops. make me an offer. lowball me. got something to trade?
the monte is sold to a CL guy who has ambitions of building a drag car.
used 67-72 chevelle small block headers $10
A body disc brake setup(72 chevelle) complete spindles/rotors/calipers/pads all on a running driving car $200
stock control arms for same fronts $100 rears $35
updated removed some stuff, adding more:
70-81 camaro v8 radiator, good condition $40
73-87 chevy/gmc truck v8 radiator, solid shape didn't leak $40
cheap parts store copper/aluminum fin trans cooler. fins kinda beat up but challenge friendly price $5
np241C transfer case with 31 spline input(fits 4L80, nv4500) from a 1 ton mid 90's chevy truck $125
th400 truck transmission, fixed year yoke. it does work, i was driving the truck, but the fluid smells toasty. it never slipped on me in 2 years of use. $100 with converter
73-87 truck headers for small block, were on my 90 burb for 30 minutes of run time then removed. $40
14 bolt gm truck rear disc brake conversion parts. SRW hubs, 1 pair of rotors on hubs with no miles but surface rust, 1 pair new in box rotors, new caliper brackets with bolts. takes 73-87 4x4 front calipers. $150 will throw in a pair of axle shafts for free from an 87 K20.
88-98 fullsize gm truck 2" drop spindles with rotors and calipers, still attached to stock control arms that have newer ball joints and poly bushings. everything is used. front springs included, i believe they are 2" drop springs but can not promise anything there. $200
10 bolt 3.08 open rear, drum to drum, from an 88 silverado 1500 2wd. 5 lug. $100
This will be an incredibly long shot but, do you have any radio buttons that would work on a 2002 suburban factory radio/cd unit??
Will make a package deal on the 3500HD and the 90 3500 after i pull the engine from the 90. An opportunity came up and need liquid cash fast.
Needless to say there's going to be a big updated list this weekend and stuff will be hitting ebay.
got your pic, unfortunately it's completely different from the 00's gm head units i have laying around.
You'll need to log in to post.