Since the flea market idea seemed somewhat successful in the past few years at the challenge, I figured it'd be a good time to start up a thread. I'm going to add things to this post as I find them in my garage and storage locker. I can bring them down to the challenge, or if you want, you can pick them up beforehand in the Cincy area. If you have items for sale you want to bring to the challenge, feel free to post in this thread, too, if you don't want to start your own.
Let me know if you want something, and I'll make sure to pack it for the trip to Gainesville.
Can i call dibs on all the wheel spacers and catch up with you in December? They may be the ticket to getting the Wartburg wide enough. I’m still early on enough that changing the bolt pattern won’t ruin everything
In reply to Patrick :
Someone’s PM’d me about them already and is taking measurements this weekend to figure out which set they might want. Mind if I get back you you after them?
Just added a few more items in the initial post, including some oil filters for cars I no longer have.
If anyone's interested in these I can pull them out of storage to take pics / get more detailed specs:
- 3" diameter short ram intake piping, w/ 3" to 2.5" adapter, has a Vibrant cone filter on it, used. $30
- A pair of Eibach 2.5" springs, IIRC they're 250lb/in and 7" or 8" long? Only test-fitted once. $70
- A pair of no-name 2.5" barrel springs, 616lb/in and 250mm (9.84") long. Came with D2/Ksport coilovers, I had them on my Corolla for a few years. $35
- A set of ARP rod bolts for 4AGE early redtop or bluetop rods (Part# ARP-203-6001) - won't fit silvertop (AKA late redtop) rods or I'd be running them. New in packaging. $50
- MS2 daughterboard, new in packaging, $120.
- Hayden 1009 PS cooler with 3/8" barbed fittings, well used, $5.
Stuff I might be interested in buying:
Bosch LSU 4.9 sensor
Standalone TPMS system with internal sensors
In reply to GameboyRMH :
Movng my post too.
Still interested in the MS2, maybe we can talk at the challenge as I need to re-learn the MS terminology again.
eastsideTim said:
- Purolator L14476 oil filter, used on smaller Toyota 4 cylinders, among other engines. - $1
I will take this.
Stampie said:I'm not bringing much but I do have ~3/4 of a gallon Rust-Oleum metal primer. Free!
Me, please!
GTXVette said:THE 2.5 WILL WORK FINE THANKS, Patrick I Really only need 2 if you want the rest
I talked to Patrick, he'll take the other two, so how does 2 for $20 sound?
GameboyRMH said:eastsideTim said:
- Purolator L14476 oil filter, used on smaller Toyota 4 cylinders, among other engines. - $1
I will take this.
It's yours.
I have a few tools that I no longer use. Most were used only a few times, for rebuilding a Honda B16A3 Del Sol engine.
https://drive.google.com/drive/folders/0B_RHUGrO4ZoTMDFOUWMxTEVqM1E?usp=sharing
Also have an older Snap-On puller set, with slide hammer (not pictured).
I have several '80s and '90s Honda manuals, including a 1996 Civic manual, which covers the B16A3 engine and its transmission, found in the 1996 Del Sol VTEC.
https://drive.google.com/drive/folders/0B_RHUGrO4ZoTREZCVUlVTjFfb2s?usp=sharing
Various old magazines (and comic books)
https://drive.google.com/drive/folders/0B_RHUGrO4ZoTTnh3alY1VERqWUE?usp=sharing
In reply to GTXVette :
See you at the Challenge! I should be arriving on Thursday, and am staying at the host hotel. I’ll be the guy on the Dodge Rampage team with the long hair.
Anyone else want anything else on the list before I pack up for the trip?
Can you stop long enough for a Hand off at 75 AND Hwy. 20 / Cartersville GA.
I will be the long haired dude that likely ain't Going.
Got as far as plugs/wires tonite before the Mosquito's ran me off. Will know by noon tommorow if the car is going to run.
GTXVette said:Can you stop long enough for a Hand off at 75 AND Hwy. 20 / Cartersville GA.
I will be the long haired dude that likely ain't Going.
Got as far as plugs/wires tonite before the Mosquito's ran me off. Will know by noon tommorow if the car is going to run.
Possibly. I’ll probably have to call you from the road to give you an idea of when we’ll be nearby. If it’s anything like last year, random traffic will throw our timing off. Hope you can make it to Gainesville.
Anybody have a BEGI/Cartech FMU and/or some 30ish lb ford injectors? 91 318is ECUs/chips motronic tuning is a slow and painful process.
I could bring my Mercedes wheels. https://grassrootsmotorsports.com/forum/201x-classifieds/15x7-5x112-ronal-mercedes-wheels400/143735/page1/
You'll need to log in to post.