The car has been down since March with a broken transmission. It is still down but I have everything to repair it.
For sale: 2009 Mazda Miata
115k miles on the chassis, about 110,000 on the motor.
2.5 swap with BC 0402 Stage 2+ cams and Mazda speed valve springs.
Oil pan baffle
Koyo 34mm radiator
Flyin Miata steel light weight flywheel
ACT clutch rated for 341 tq
Stage 3 5 speed transmission (freshly built not in car yet)
Mishimoto 25 row oil cooler with thermostat
Flyin Miata Super Charger
-MANY spare parts for the supercharger
-Ported inlet and throttle body opening
-Over size ZZP heat exchanger
-ZZP high volume pump
-3.1, 2.8 and 2.6 pulleys
-Xerolimit Intake
-Grams 70mm Throttle Body
-Spare supercharger housing
Radium Fuel Rail
550cc and 800cc injectors
Ready for E85 tune
return fuel setup with 2.5L surge tank
Flex fuel with gauge (flex fuel sensor is at the surge tank) (not a installed yet)
300lph fuel pump
GWR 2.0 XL header ceramic coated black
GWR midpipe with 5” cat and resonator
Custom titanium axle back with ticon muffler (weighs 7 pounds)
Battery relocated to trunk
RX8 front hubs
RX8 VLSD differential with 4.10 FD ring and pinion, new bearings and seals
I have another RX8 diff with 4.77 ring and pinion
RX8 axles, RX8 rear uprights with new timken bearings
AWR fog light delete brake ducts and the plate that attaches to the hub for the brake hose, the hose did not survive and there is currently no hoses on the car for the brake ducts
Custom spring rate Supermiata Xidas, 16k front 10k rear
Auto Exe Strut tower bar
Progress front sway bar
All rear bushings replaced with poly bushings
18x11 konig hypergrams with 285/30/18 front and 295/30/18 rear Bridgestone RE71RS tires (pretty fresh)
-Front RX8 Sakebomb Garage BBK w/ Gloc R10 pads new)
-Rear RX8 calipers, EBC slotted rotors with Gloc R8 pads
Carbon Miata fender flares
Trackspec NA/NB hood louvers
Cockroach V2 Fender vents
Cut front fenders
NoPro rear “diffuser”
Black Club headlights
Racebred front splitter, custom splitter blade, it is 3” wider and this would be considered a “6 inch” Splitter with 9LR splitter ramps
9LR V2 wing (with the wiggle fix) I have 2 sets of pylons for “inside the rear bumper” and normal
9LR double Deuce second wing element
OEM hardtop wrapped gloss black (gloss black underneath but it could use a repaint) The interior of the hardtop has been gutted and painted black
Blackbird Fabworx GT3 roll bar
All interior deleted behind seats
Braum reclining seats
Driver’s seat is bolted to the floor with no sliders
G Racing shifter with CF knob
Dual gauge pod with boost and Oil temp
CF rear view mirror with blue convex mirror
Blue convex side mirrors
ABS door cards
Infinity door speakers
Auto Exe steering wheel
Bikini top
I estimate that the car makes about 325 whp and about that in torque on 93 and about 350 whp on E85
The car is heavy at about 2650 lbs.
I will add stuff as I remember what I am missing
I am asking $40,000 but negotiable if you want more or less
I will sell as a roller $30,000, no motor, exhaust, transmission or supercharger
