Parting out '90 Miata (track rat)

Sorry I don't have prices set yet, just trying to get the parts out there so people know it's for sale.

I've got a TON of good Miata parts for sale from parting out the '90 track rat, let me know if you are interested in any of it. All of this stuff has 1 track day, except the tires/wheels/bearings which have 5:

• NA Racing Beat exhaust
• Front brakes: 949 Racing 11" Wilwood kit with curved vane 2-piece rotors an Carbotech XP10 pads
• Rear brakes: Flyin' Miata 10" Wilwood kit (no e-brake) with Carbotech XP 8 pads
• Sport brakes master cylinder and booster
• 949 Racing Swaybar setup with adj end links, poly bushings, and front mount reinforcement
• Konig Flatouts, 15x8 ET 25, 205/50 R888s, probably 50% life left
• 8lb ACT flywheel with OEM Exedy clutch
• Depowered steering with poly bushings and R-package outer tie rod ends (This was done the Flyin' Miata way)
• Front uprights with blueprinted and balanced ART hubs with studs (Purchased from Flyin' Miata)
• Rear uprights with blueprinted and balanced bearings, OEM hubs, and ARP studs (Purchased from Planet Miata)

After that, there are the subframes and all body panels (except the hood), taillights, finish panel, etc.

Shoot me a message if you're interested in anything.

Hold the rack for me for a few if you still can. Gotta see what goes on with this other car and how bad it's going to put me in the hole.

No worries.

Bad timing for me but whats the pricing for the XIDA?

Do you want just the XIDAs or do you want the sway setup as well?

I would suggest it as a package, it's berkeleying amazing on track.

With a weaker 1.6, 1 year older tires (same tires but a year between track days), and a passenger in the car I picked up 2.5 secs a lap over the VMaxx setup and there was still more time. The front end grip is insane.

I already have the sways and new superlinks,so just the coilovers.My email is tsmith011@sympatico.ca if you want to take it there,I have konis out for a revalve now so the chances I can afford this right now is slim.

^I just had someone email me about the entire package, I'd like to sell it that way if possible. I'll get back to you if he isn't interested.

Price on Flywheel/clutch (assuming this is 1.6L?)

Price on Wheels/tires (if you're shipping) Please

PM is fine, i'm in saint louis, mo.

In reply to z31maniac:

No worries,love to have them but like I said the timing on my end doesn't get much worse.

GLWS

Autolex wrote: Price on Flywheel/clutch (assuming this is 1.6L?) Price on Wheels/tires (if you're shipping) Please PM is fine, i'm in saint louis, mo.

Sending PM now.

I need a driver's side power window regulator assembly, shipped to 48103. PM me if you've got one.

Thanks.

Sorry, base model car. Crank windows.

In reply to z31maniac: Where are you located? I'm in pa and would be interested in the exhaust depending on shipping and price.

Thanks

I'm in Tulsa. I'll see if I can get an idea on shipping, big thing is the boxes for it. It may not make sense for either of us.

z31maniac wrote: I'm in Tulsa. I'll see if I can get an idea on shipping, big thing is the boxes for it. It may not make sense for either of us.

I lost my shirt shipping exhaust I sold on ebay. Good luck with the part out!

Thanks

XIDAs are sold.

Do you have stock springs for that thing laying around?