VW 8V ITB Fuel Injection or Sidedraft Carb Setup

This is a vintage Super Vee throttle body setup that was used with mechanical injection until later, then adapted to 38mm Lectron Flatside carbs.

This is a custom machined intake manifold. The vertical throttle shafts are machined down, so when open, there is no shaft obstruction to flow, other than the butterfly itself. These would be great by themselves if you are going Megaquirt or similar.

Or - you could buy them both and use the carbs for a super simple bolt-on fueling setup. As most know, flatslide motorcycle carburetors flow a lot more than the equivalent venturi carb (DCOE/DHLA). These have a custom throttle cable as well so it's combined to four into one for a single-pull.

I'd sell these split up or together.

Manifold ITBs - $350

Lectron Carbs $350

Together, I'd let them go for $550.

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5354_zpsa6ac6fac.jpg.html][/URL]

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5359_zps878d6668.jpg.html][/URL]

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5360_zps1dc6ea9a.jpg.html][/URL]

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5358_zps8a6020bf.jpg.html][/URL]

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5356_zps655a50da.jpg.html][/URL]

[URL=http://s61.photobucket.com/user/greggearhead/media/Sell/101_5355_zps64240afd.jpg.html][/URL]

Offers and trades considered as well.

Still got em. Somebody wanna make a bitchin Megasquirt VW setup with these?

Bump

And still have them. Someone make an offer - want them gone.

Sold!