In reply to Ranger50:
Is this the F250?
In reply to Ranger50:
Is this the F250?
In reply to crisd:
No, 91 Ranger.
Andy Neuman wrote: In reply to crisd: We aren't ruling out the Ranger, S10, and other incapable pickups that aren't "real" trucks. Anything fun that resembles a pickup is good to go.
My s10 is more than capable of doing truck stuff...
In other news...
The t56 / lt1 is out of the trans am.
In reply to pimpm3: Looks like you'll have plenty of hp, what are you doing for handling and getting some weight on those rear tires?
What was the ruling on the truck class. Its really a crown vic, but I wanna play
Bell tech drop leafs with a 1.25 inch block in the back, drop spindles up front, zq8 steering box, zq8 front springs and sway, zq8 rear bar, bilstein shocks and LSD.
17x9.5 corvette wheels with Hankook RS3's for auto x. Drag slicks for the 1/4 on stock 16 inch trans am wheels.
In reply to AutoXR:
Looks like a truck to me.
In reply to AutoXR:
That's f'ing cool... I've always thought about using a Crown Victoria to use for a truck foundation. How does it drive?
In reply to pimpm3:
Are the zq8 components an up grade over the base model S10?
Zq8 is the factory handling package offered on the 2nd gen s10's. They come with a quicker steering box, sway bars front and rear and lower stiffer springs.
I have a ZQ8 rear sway in my scrap pile if anyone wants it, it's rusty but not damaged, free for pickup in southeastern PA or just pay for the shipping.
I have a decently nice ZQ8 S10 but it's outside the budget.
However, i got my Rampage running well enough to go up and down the street, and i got a line on some front coilovers for handling (the ones already on it are purely for slammage). And the 225/45/15s I ran on my Caravan last year will fit on it. Not much assembly required...
And hey look my 09 Challenge car and my 13 Challenge car where my teammates all backed out and i didn't go are in there. And the front of that s10.
How is everyone feeling about a chopped car with a pop riveted on tonneau cover?
Are we going to do it thursday?
Andy Neuman wrote: How is everyone feeling about a chopped car with a pop riveted on tonneau cover?
I have an old tonneau that has it's Velcro separated from a short bed f150.
I can bring it to the challenge of you want to rivet it on there?
In reply to Robbie:
I saw a pickup truck liner on the side of the road and almost turned around to pick it up last night.
Also trying to figure out how to put the nitrous bottle in place if I have a riveted on tonneau cover.
In reply to Andy Neuman:
You can rivet on snaps? They should rivet to the car and then they are two piece you hammer together on the tonneau side. Should be too expensive for a pack of hundreds on the internet.
In reply to Robbie:
Think NASCAR Truck series cover
In reply to Andy Neuman:
I have a pneumatic rivet gun if you want me to bring to challenge parking lot. Saves a LOT of time.
In reply to Ovid_and_Flem:
Q45 Goals
Looks like too much roof to me.
In reply to Andy Neuman:
Awesome awesomeness!
Bad Mother Trucker may have just munched the NV3500. I guess that's the issue with a glass transmission behind a 454.
You'll need to log in to post.
