Seat ID Help

Can anybody ID theses seats?

They were installed by the PO and I need headrests.

Thanks!

They are recovered something or others. Look a lot like the seats in my wife's 626, but could easily be non-recaro 80's BMW seats from a 320 or 325. See the way the sides pucker a little? Obvious sign that they were recovered. Measure the distance between the head rest post holes and go hunting. The 626 is a good place to start. It has the two hole system on the headrests.

Take the passenger seat out and see if you can read a part number off the seat frame or the foam cushion. Post that. It may be identifiable (long shot) by someone on this board, or at least identify the OEM. I worked with a headrest plant and we had 363 different headrests and every single one used a different metal rod. Interchangeability was awful. Trying to ID these seats will be your best bet.

I'm assuming they are in some sort of Ford car, and they vaguely look like fox Mustang / TBird seats. The plastic on the sides should be an indicator. Oh, and a +1 on pulling one out and looking for part #'s.

(Sweet interior BTW!)