1 2 3
SVreX
SVreX MegaDork
6/10/15 11:32 a.m.
Fueled by Caffeine wrote: metric canoe

Useful metric canoe. I'll allow it.

spitfirebill
spitfirebill PowerDork
6/10/15 12:55 p.m.

Well for what its worth, brake bolts are those things I like to get from the dealer. They usually are not just regular old bolts, but have shoulders or whatever.

That is the most useful canoe I seen.

Cotton
Cotton UberDork
6/10/15 1:44 p.m.

Thanks to the canoe this thread was bumped at just the right time for me. I'm refinishing the two piece Speedline wheels on the 993 and need 96 replacement bolts.

Cotton
Cotton UberDork
6/12/15 1:18 p.m.

ugh okay I either called, emailed, or checked websites on every source listed in this thread and no one had my specific bolt. Does anyone know of a good bolt restoration service where I can just send them my bag of hardware and have them refinished? I'm in a time crunch here otherwise I'd just use my small tumbler and do a few at a time since there are 96 of them.

If anyone wants a challenge the bolt I'm looking for is a button head m8-1.25x25mm. The challenge here is these are for speedline wheels that came standard on 993 targas, so they have an 11mm shank where the bolt goes through the wheel. I can find m8-1.25x25 all over the place but none with the shank. It's basically this, but with the shank. https://www.fastenal.com/products/details/1139918?term=1139918

unevolved
unevolved SuperDork
6/12/15 1:37 p.m.

11mm diameter, or 11mm long shoulder?

Cotton
Cotton UberDork
6/12/15 1:38 p.m.
unevolved wrote: 11mm diameter, or 11mm long shoulder?

11mm long shoulder.....sorry should have clarified.

Cotton
Cotton UberDork
6/12/15 1:50 p.m.

here are a couple of pictures....one severely rashed wheel, which is the whole point of this effort, and another of the type of bolt in question.

<img src=" photo IMG_1900_zps1l73lch3.jpg" />

unevolved
unevolved SuperDork
6/17/15 7:55 a.m.

Sorry for the delayed reply. Is it possible to get a standard socket in there if you switched to an AN-5 bolt? You'd be able to get the grip length right, and 8mm is within a few thou of 5/16".

whenry
whenry New Reader
6/17/15 10:25 a.m.

Surprised that no one has mentioned Tractor Supply as a source. There is also a nearby Ace that has a great bolt section. The owner told me one night at a cocktail party that he didnt realize how much business he got off that section until his buyer tried to go cheap and the regulars complained.

1 2 3

You'll need to log in to post.

Our Preferred Partners
uDcq7qZTr2L9EuOx3C0IsgzESRN4n3jiKupAFWkOBJNOUXpfc3nPXaZZHGnxtS4M