Feedyurhed
Feedyurhed UltraDork
12/3/23 1:49 p.m.

What do we think about them? Worth the money? I am about to start a restoration project (finally!) and I need to have a lot of small parts cleaned.  Also considering parts tumblers............or both. Any experience?

Patrick
Patrick MegaDork
12/3/23 2:09 p.m.

The central machinery one gets a 9.5/10 from me. Love that thing, they just didn't put enough teflon tape on the valve so I had to fix that for it not to leak

adam525i
adam525i SuperDork
12/3/23 2:15 p.m.

There's a recent thread on this over in the Shop and Garage Talk subforum - https://grassrootsmotorsports.com/forum/shop-talk/advice-on-ultrasonic-cleaners/260216/page1/

Slippery
Slippery PowerDork
12/3/23 2:15 p.m.
adam525i
adam525i SuperDork
12/3/23 2:15 p.m.
Feedyurhed
Feedyurhed UltraDork
12/3/23 3:01 p.m.

Ha, thanks everyone. The other thread literally just started days ago! Appreciate the re-direct.

Ranger50
Ranger50 MegaDork
12/3/23 5:06 p.m.

I was looking at a 10-15L one off Amazon... lots of transmission parts ain't small.

ShawnG
ShawnG MegaDork
12/3/23 7:01 p.m.

I have the little harbor freight one and I've been happy so far.

I would like to upgrade to a larger unit 8n the future.

Trent
Trent PowerDork
12/3/23 7:38 p.m.

I recently purchased the Vevor 30 liter ultrasonic and am pleased with it.

Happy to report it will swallow an entire cylinder head!

all the ebay/Amazon units with the blue label around the controls look like they are made in the same building. We get 18-36 months of regular use out of them before they stop functioning somehow. Usually the heater fails.

ddavidv
ddavidv UltimaDork
12/4/23 7:29 a.m.

I pre-heat my water on the stove so it doesn't ask much of the built in heater.

dclafleur
dclafleur Reader
12/4/23 7:40 a.m.

In reply to Trent :

What do you run for a cleaning solution in it?

volvoclearinghouse
volvoclearinghouse UltimaDork
12/4/23 9:29 a.m.

Just bought the Vevor unit, funny I just started this similar thread.  

https://grassrootsmotorsports.com/forum/shop-talk/advice-on-ultrasonic-cleaners/260216/page1/

volvoclearinghouse
volvoclearinghouse UltimaDork
12/4/23 9:31 a.m.
Trent said:

I recently purchased the Vevor 30 liter ultrasonic and am pleased with it.

Happy to report it will swallow an entire cylinder head!

all the ebay/Amazon units with the blue label around the controls look like they are made in the same building. We get 18-36 months of regular use out of them before they stop functioning somehow. Usually the heater fails.

I measured the length of the basin and it's about 19.5" long.  So if your cylinder heads are shorrter than that, yeah, it'll work.  devil

Professor_Brap (Forum Supporter)
Professor_Brap (Forum Supporter) UberDork
12/4/23 10:08 a.m.

I absolutely love mine for small house projects, heads, carbs and valve covers. I use mine often. 

Trent
Trent PowerDork
12/4/23 10:20 a.m.
dclafleur said:

In reply to Trent :

What do you run for a cleaning solution in it?

A splash of an alkaline degreaser in the water. Just barely enough to lightly tint the water whatever color the degreaser is. Super clean, simple green. We use a Glenlabs product from the restaraunt supply store that costs pennies but smells and works exactly like superclean.

Too much runs the risk of darkening aluminum. Also too much will generate a column of suds as the vibration does its thing.

 

Trent
Trent PowerDork
12/4/23 10:22 a.m.
volvoclearinghouse said:
Trent said:

I recently purchased the Vevor 30 liter ultrasonic and am pleased with it.

Happy to report it will swallow an entire cylinder head!

all the ebay/Amazon units with the blue label around the controls look like they are made in the same building. We get 18-36 months of regular use out of them before they stop functioning somehow. Usually the heater fails.

I measured the length of the basin and it's about 19.5" long.  So if your cylinder heads are shorrter than that, yeah, it'll work.  devil

Well, clearly it did  laugh

 

Looks like the block will fit too. I might have to flip it a few times to get the whole thing though.

procainestart
procainestart SuperDork
12/4/23 10:31 a.m.

In reply to Trent :

Sorry if covered elsewhere, but will this thing support the weight of a block? 

Trent
Trent PowerDork
12/4/23 11:09 a.m.

In reply to procainestart :

It will support the weight of my 40lb aluminum Suzuki block wink It won't hold an iron V8

It is stout enough to support the 66lbs of water in it plus another 40 perhaps. I don't really know what its limits are and they arent covered in the "manual" that came with it.

volvoclearinghouse
volvoclearinghouse UltimaDork
12/4/23 12:24 p.m.
Trent said:

In reply to procainestart :

I don't really know what its limits are and they arent covered in the "manual" that came with it.

Emphasis added.  It's more of a pamphlet.

ddavidv
ddavidv UltimaDork
12/5/23 7:07 a.m.

Universal truth:  two things you can never have one that is "too large" -- garages, and ultrasonic cleaners.

You'll need to log in to post.

Our Preferred Partners
hdO7nNcO6cbfqDLznRAhQqn9NUPDyUjTvvYanp2hNMQx1QyAufEwXr8txjPdQXJp