ive been having some charging system issue lately and i think i found my problem
those are the wires from the alternator and the reg/rec plus my oil light and N light leads.
ive been having some charging system issue lately and i think i found my problem
those are the wires from the alternator and the reg/rec plus my oil light and N light leads.
Yup that would do it... solder them up and heat shrink over it then wrap in tape you should be good. Double check the plug to the rectifier/voltage reg as well they tend to melt the plugs
i just replaced the connector about a week or so ago the old one was all melted
You'll need to log in to post.
