Mr_Asa
UltimaDork
4/14/23 4:30 p.m.
Got a bunch of crap. This thread is gonna get updated sporadically.
Hobart Mixer. No, I didn't know Hobart made mixers either. Was gonna use it for mixing plaster for casting. Now you can use it for whatever!*
*Not sure if it works, haven't plugged it in, USF was gonna get rid of it and I grabbed it before it could be tossed.
Plastic shelves, good for carburetor insulators! Folding aluminum table, good for... table stuff.
Various electric chain saws. All work
Work light
'54 SeaBee 12D10 motor, '54 Johnson 3HP trolling motor that a previous owner painted to look like a '61 Johnson 3HP trolling motor
'56 (I think) Evinrude Fleet-Twin 7HP (or 7.5HP, been a while)
Mid 50s Johnson 5.5HP, '56 I think?
Johnson Mile-Master tank. Top is rusted out, has a bunch of sludge and crap in it, but good for parts or mancave decoration?
More to come.
I like that folding table, but not sure about how to get it from FL to PA.
Coming from the supermarket world, I mainly know Hobart for making mixers. That's a wee one. I usually designed for monsters with 208V-3 phase motors.
Sorry to hear about the divorce.
Mr_Asa
UltimaDork
4/14/23 5:02 p.m.
In reply to Ian F (Forum Supporter) :
Challenge express? Curtis will be down last I heard and I'm already sending up a kiln with him.
It needs a rivet or two to keep the a couple legs attached, so you can have it.
I would like the work light. How much?
Mr_Asa
UltimaDork
4/14/23 8:43 p.m.
In reply to madmrak351 :
Whatever you think is fair, honestly. Want it out.
Ok what is your time frame. Also I have some springs that I need to give you that I believe are tuning parts for your waste gate.
Mr_Asa
UltimaDork
4/14/23 9:28 p.m.
I'm kinda open. If I know it is going out I can set it outside while I work on other stuff and then put it inside when needed.
May be going to Tallahassee next weekend?
2nd for the table if it can be challenge pickup? I'm bringing you exhaust manifolds already
Mr_Asa
UltimaDork
4/15/23 9:09 a.m.
In reply to Patrick :
Sounds good. Was gonna bring it anyways
jgrewe
Dork
4/15/23 11:33 a.m.
I'm interested in the mixer.
Mr_Asa
UltimaDork
4/15/23 11:52 a.m.
In reply to jgrewe :
Sweet. I'll get it over to you next week sometime?
In reply to Mr_Asa : I can meet you at I75 and I10 if you go to Tallahassee or do challenge pick up. Slight possibility we may be going down to Bradenton in the next month. Whatever works for you let me know, thanks!
Mr_Asa
UltimaDork
4/15/23 2:04 p.m.
In reply to madmrak351 :
I usually head up 19/98 to get up to where I'm going, so 75 & 10 would be pretty out of the way. Challenge works, or if you're in Bradenton.
Does the ryobi electric saw take the standard corless drill style battery? If so, how much?
Mr_Asa
UltimaDork
4/15/23 2:16 p.m.
In reply to Dusterbd13-michael :
Yup, standard One+ 18V battery.
What do you want to pay? I don't really have a price in mind for anything but the outboards
In reply to Mr_Asa : That sounds good. I will let you know if I go down to Bradenton. Otherwise see you at the Challenge. Thanks again!
Mr_Asa said:
In reply to jgrewe :
Sweet. I'll get it over to you next week sometime?
Just bring it when we charge your AC in the Miata.
Mr. Lee
PowerDork
4/18/23 10:28 p.m.
interested in the saws in Duster falls through/backs out. Somewhat close as well.
The Hobart mixer is worth money, even if it doesn't work. They're very repairable, and that "food grade" certification on the side is the golden ticket.
Think of it as a Kitchen Aid with a supercharged big block and an up to date logbook.
I'm may know somebody who is interested in it, let me check.
Sorry to hear about the divorce.
Mr_Asa
UltimaDork
5/18/23 5:12 p.m.
Hammer store fluxcore welder. $50? Make offer?
Mr_Asa
UltimaDork
5/18/23 5:17 p.m.
Slightly better welder. Capable of gas shielding, and aluminum from the spool gun. Honestly no clue. $100? Make offer?
Mr_Asa said:
Slightly better welder. Capable of gas shielding, and aluminum from the spool gun. Honestly no clue. $100? Make offer?
Can you bring it to the challenge? I will probably take it off your hands if it can do what I think it can? If I don't buy it, I'll buy ya a drink for the effort.
In reply to wvumtnbkr :
Ill buy it if you don't assuming the aluminum spool gun is included
In reply to Dusterbd13-michael :
That's what I was going for! Lolz.
