That was a very informative and timely video. I've used spacers with and without the snout and always make sure they fit flat. With an aluminum wheel (spacer or not) there should be very little rotation of the lug nuts between "just snug" and "fully torqued". Steel wheels are another story...., ;-)
By David S. Wallens
8/19/21 2:48 p.m.
That was pretty informative, but IMO, too much talking, not enough footage of wheels flying off on the racetrack.
8/19/21 3:07 p.m.
Great short to the point video, that's not something I've done in the past but will start doing.
Thanks!
8/19/21 5:25 p.m.
That was interesting! Thank you!
8/19/21 6:36 p.m.
Just for you, I'll relay that to James and his team.
8/19/21 6:42 p.m.
No wheel spacer involved, but here's one for you.
8/19/21 7:24 p.m.
That was a very informative and timely video. I've used spacers with and without the snout and always make sure they fit flat. With an aluminum wheel (spacer or not) there should be very little rotation of the lug nuts between "just snug" and "fully torqued". Steel wheels are another story...., ;-)
8/20/21 9:18 a.m.
In reply to Keith Tanner :
There is a spacer in the video
8/20/21 3:45 p.m.
In reply to GVX19 :
Brake rotor?
8/20/21 5:22 p.m.
In reply to adam525i :
Yes. It wasn't a two-piece before.
8/20/21 6:24 p.m.
In reply to Keith Tanner :
So you got an upgrade out of the deal.
Displaying 1-10 of 13 commentsView all comments on the CMS forums
You'll need to Log in to post comments.