FS: Finned aluminum valve covers for the 231/3.8 and 4.1 liter Buick V6. [Massachusetts, USA]

Anyone looking for a really beautiful pair of finned aluminum valve covers for their 231/3.8 or 4.1 Buick V6?

These are the the stock valve covers that came on the Turbo V6 and 4.1 Riviera engines, by far the most beautiful/elegant valve covers available for these engines and not too many left around.

Cleaned and painted in a krinkle finish gray with lightly sanded and brushed aluminum fins, included is the stock rubber end piece, breather tube fastening bolts, and light blue/gray oil filler cap.

The photos tell the story best.

Like to get just $55 or your best offer for the pair and I'll cover shipping within the US.

Thanks!

TC

Breather is on the same side as the oil fill? I've never seen that before.

Sold ! And just in time too. I was about to put them back on the "project" shelf and start looking for a good Buick V6 for the Vega. Just found a stock Buick very low profile four barrel intake manifold for the 4.1, would make a V6 install a breeze.