759NRNG
759NRNG UltraDork
1/2/20 11:40 p.m.

Your execution of power adders is beyond reproach(professorial response)......GET THIS BEEATCH TO SIT DOWN AND SPANK EVERY SWINGING .....THAT DARES TO LINE UP(knucklehedd response)....Happy New year y'all....be safe ......peace out

bluej
bluej UberDork
1/3/20 9:37 a.m.

what's that coil of copper colored tubing?

wheels777
wheels777 SuperDork
1/3/20 10:09 a.m.
bluej said:

what's that coil of copper colored tubing?

We are monitoring exhaust back pressure. We want to make sure that we can spool as fast as possible if we are pulled to the line 2nd, at the same time we don't want to have too high of a drive ratio and cause the power to be down. During this test we were as high as a 1.91 to 1 ratio. That was with a .63 Housing. The next test will be with a bigger housing (higher A/R). 

TheV8Kid
TheV8Kid Dork
1/3/20 10:39 a.m.
DeadSkunk (Warren) said:

Where did that cute, teeny intercooler come from?

That little guy came from eBay. Should support a lot of horsepower.

TheV8Kid
TheV8Kid Dork
1/3/20 10:40 a.m.

The benefits of small turbos...

https://youtu.be/Dx2KX_lLdh4

bluej
bluej UberDork
1/3/20 1:22 p.m.

cool! so the copper tubing is plumbed to the main exhaust route on one end, and to a pressure sensor at the other? copper to help shed heat for the sensor? Pretty slick. 

are the turbos genuine garretts, or knock off? if knock off, that's pretty amazing for a pair of sub $150 turbos

TheV8Kid
TheV8Kid Dork
1/3/20 1:33 p.m.

In reply to bluej :

They're knock offs.

wheels777
wheels777 SuperDork
1/14/20 7:27 p.m.

Fuel line is getting closer...

wheels777
wheels777 SuperDork
1/15/20 7:30 p.m.

That should feed it...

wheels777
wheels777 SuperDork
1/18/20 1:10 p.m.

FEED ME!!!!  

wheels777
wheels777 SuperDork
1/26/20 5:55 p.m.

At 17 psi boost the new converter made 35 more HP. Then changed the exhaust housings and made 22 more. 
When we cranked the boost to 19 we were making 840 HP (throwing rubber chunks).   Above that the tires were spinning and pitching chunks of rubber (even with 200# of weight in the trunk).

759NRNG
759NRNG UltraDork
1/26/20 7:34 p.m.

Aw............... I call BS wink

Norma66-Brent
Norma66-Brent Reader
1/26/20 8:09 p.m.

"Fragola" must be Italian 

wheels777
wheels777 SuperDork
1/26/20 8:14 p.m.
Norma66-Brent said:

"Fragola" must be Italian 

Connecticut....USA

wheels777
wheels777 SuperDork
1/26/20 8:16 p.m.
759NRNG said:

Aw............... I call BS wink

Sorry you feel that way. Doesn't change what happened. Feel free to stop looking at the thread. We are just trying to share with the folks who have been enjoying the build. wink

wvumtnbkr
wvumtnbkr UberDork
1/26/20 8:24 p.m.
wheels777 said:
759NRNG said:

Aw............... I call BS wink

Sorry you feel that way. Doesn't change what happened. Feel free to stop looking at the thread. We are just trying to share with the folks who have been enjoying the build. 

I pretty sure he was being sarcastic.  He has been rooting for you through the entire thread.  Hence the winky face.  Haha.

ChrisLS8
ChrisLS8 New Reader
1/26/20 8:26 p.m.

Nvm

Norma66-Brent
Norma66-Brent Reader
1/26/20 8:44 p.m.

In reply to wheels777 : I bringing in "a Christmas story" reference. All your work looks super clean!

 

wheels777
wheels777 SuperDork
1/26/20 9:52 p.m.
wvumtnbkr said:
wheels777 said:
759NRNG said:

Aw............... I call BS wink

Sorry you feel that way. Doesn't change what happened. Feel free to stop looking at the thread. We are just trying to share with the folks who have been enjoying the build. wink

I pretty sure he was being sarcastic.  He has been rooting for you through the entire thread.  Hence the winky face.  Haha.

I did not realize that. wink

wheels777
wheels777 SuperDork
1/26/20 9:56 p.m.
Norma66-Brent said:

In reply to wheels777 : I bringing in "a Christmas story" reference. All your work looks super clean!

 

Thanks you. It's starting to show the wear of competition runs, Dyno sessions and testing. But we really do like sharing it with folks. It's a blast to run and watch. 

Recon1342
Recon1342 HalfDork
1/26/20 10:06 p.m.

Going stupid fast in "cheap" cars is awesome!!! Good work, guys!!!

mazdeuce - Seth
mazdeuce - Seth Mod Squad
1/27/20 6:04 a.m.

As always I'm enjoying updates. Be sure to share if Calvin shoots any more videos of the work or walk arounds of what has happened. I always seem to learn something new when he does that. 

dculberson
dculberson MegaDork
1/27/20 8:28 a.m.
wheels777 said:

At 17 psi boost the new converter made 35 more HP. Then changed the exhaust housings and made 22 more. 
When we cranked the boost to 19 we were making 840 HP (throwing rubber chunks).   Above that the tires were spinning and pitching chunks of rubber (even with 200# of weight in the trunk).

That's amazing. You make me want to start building and follow this recipe.

759NRNG
759NRNG UltraDork
1/27/20 8:59 a.m.
wvumtnbkr said:
wheels777 said:
759NRNG said:

Aw............... I call BS wink

Sorry you feel that way. Doesn't change what happened. Feel free to stop looking at the thread. We are just trying to share with the folks who have been enjoying the build. 

I pretty sure he was being sarcastic.  He has been rooting for you through the entire thread.  Hence the winky face.  Haha.

 

Wheelz my bad .....I was goofin' carry on kick butt!!!!

wheels777
wheels777 SuperDork
1/27/20 2:38 p.m.
759NRNG said:
wvumtnbkr said:
wheels777 said:
759NRNG said:

Aw............... I call BS wink

Sorry you feel that way. Doesn't change what happened. Feel free to stop looking at the thread. We are just trying to share with the folks who have been enjoying the build. 

I pretty sure he was being sarcastic.  He has been rooting for you through the entire thread.  Hence the winky face.  Haha.

 

Wheelz my bad .....I was goofin' carry on kick butt!!!!

All good.  wink

^^^^^^^^^^^^^^^^^^^^^^^

Look...one of those smiley things.  I did right...right??

 

 

You'll need to log in to post.

Our Preferred Partners
GzipNhzc5lelUw0AF87MsBLFJfOY3KYBMj8j1RzALEXEaY9p9yVMk0opj3PlO8pG