We had an issue: We wanted to load our LeGrand into our Pace trailer, but we risked damaging its fragile fiberglass nose due to low ground clearance. We recently worked out the details to overcome this problem.
We went to Lowe's and purchased three boards measuring 2 in. by 10 in. by 8 ft. and a p…
Read the rest of the story
What's the third board for?
;-)
Ahh, the third board was cut in half and the two halves were used on the door portion of the ramp.
I have become very versatile at using wood and whatever else is available to get vehicles onto trailers, its not so difficult if you're used to it..for example cut the wood at an angle to lessen the hump when first mounting the ramp.